Jump to content
SAU Community

Recommended Posts

Hi all, I have a R32 GTR which now runs whiteline on the Front and Rear, sold the Rear Sway Bar on ebay as i understand its would have been suitable for other vehicles, S13 etc, that said I now have a GTR Front Sway Bar, am interesting what other models it may suit or be an advantage for, also wondering what other suspension items are interchangeable between models, as is to understand better?

Hi all, I have a R32 GTR which now runs whiteline on the Front and Rear, sold the Rear Sway Bar on ebay as i understand its would have been suitable for other vehicles, S13 etc, that said I now have a GTR Front Sway Bar, am interesting what other models it may suit or be an advantage for, also wondering what other suspension items are interchangeable between models, as is to understand better?

The R32GTR front swaybar design is unique, it only fits R32GTR's.

Cheers

Gary

Any idea on the difference?

Im looking for more lock atm. So Im wondering if I may get fouling and scrapeing issues against the sway bar with more lock..

Depends on the wheel width and offset. The main lock stop is the hub against the rear of the lower control arm and the drive shaft angles.

Cheers

Gary

Don't forget the AWD A31 cefiro :D

Ok.......so is there an advantage for the R32 GTS4 and the AWD Cefiro to use the GTR-32 Front Sway Bar Compared to their existing set up? I sold the rear bar already however still have the front just sitting there doing nothing?

  • 1 year later...

Didn't want to start a new thread

Tho,

Just wondering if the 32 gtr sway bar is interchangeable between all the AWD models, or only the 32 gtr and gts4, I have a 33 gts4.

Edited by sydking

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...