Commander Pro Help?

[BlueRB240]

Ok here is the deal, RB25 with 850cc injectors. The injectors are Sard 850cc that have been cleaned and flow tested. You do the math and the correction suppose to be 44% and injector lag time of .08 (Did a few other calculations but same results). The car idles like crap and won't rev out at all unless I set the injectors to 77% and zero out the lag time and the car will idle and rev out??? Is there some kind of conversion with Commander pro inputs vs the regular hand held commander? I'm at a total loss here. Thanks.

[paulr33]

the correction should be the same wether its via the fc pro software or the hand controller

see if you an find someone else who has used sard 850cc injectors

[BlueRB240]

the correction should be the same wether its via the fc pro software or the hand controller

see if you an find someone else who has used sard 850cc injectors

Thats going to be the hard part out here in the States. The Version of the software is V 1.10r. This is for my friends car he bought the software and it's been on my laptop for sometime till he got around to make his car run again. I'll update if I find the problem.

[rob82]

Ha ha 850cc sards - if they are side feeds throw them in the bin they are crap!!!

[BlueRB240]

Ha ha 850cc sards - if they are side feeds throw them in the bin they are crap!!!

Yeah they are the redtop sidefeed injectors. Like I said we had them checked out by a very reputable injector cleaning company and they were all fine after they were clean and balanced.