Jump to content
SAU Community

Engine Cutting Out?

57ept

By 57ept,
in Western Australia

 Share

Recommended Posts

Psyrus Contributor

Psyrus

Posted
Posted

Hey I had/have (not sure if it's still happening b/c I learned to drive in such a way it didn't happen) this problem with I bought my 33GTS-T

Basically if you just start getting on boost (>3200rpm or something) then put the clutch in the rev counter will fall all the way to 0 and your engine will die, is this right?

Two things you can do to to avoid the stalls:

- When you think your driving might cause this to happen, blip the throttle after you go into neutral/put the clutch in, and it'll stop the engine from dying

- If it does die and you're still rolling (even a little) just drop the clutch whilst in second gear and it'll force the engine to turn over and spring back to life.

Very annoying problem when I first got the car. A year later and it doesn't seem to happen anymore, but I'm not sure if that's because I just adjusted my driving to avoid it or in the 3x services between then they fixed it unknowingly.

57ept Explorer

57ept

Posted
  • Author
Posted

yeah exactly my problem ae.. to the tee i got a 32 tho

umm yeah thats what ive been doing hey just dropping the clutch but i wanna try fix the problem..

i find it happens wen the engine is a bit cold so i warm it up befor i drive it but then sometimes just randomly wen i clutch it round a corning it will just die and the steering goes all hard so i just drop the clutch

not a clue wot could be causing it tho??

57ept Explorer

57ept

Posted
  • Author
Posted

nah exactly like how i said it.

put the foot down every now and again usually its alright but sometimes wen i putt my foot down for a few seconds then hold the clutch for a bit its just dies.. reves drop from where ever its at at the time then drops to 0 and dies.

it happened once wen the engine was cold so i warm it up before i drive it but sitll does the same thing even wen i been driving for half an hour or so.

any ideas mate?

2LV8ETR Mentor

2LV8ETR

Posted
Posted
yup ive got a bov that isnt plumed into the air box or anything jsut straight into the atmosphere ..

what can i do to fix that? jut plumb it into the air box or wot?

The main issue is that the AFM is getting an incorrect signal due to the registered intake charge blowing off.

You need to use either a hybrid BOV which vents both to the atmo and recirculates (which still isn't a 100% fix) or replace the stock bypass valve and return the charge to the system after the AFM so it doesn't overfuel.

bubba Grand Master

bubba

Posted
Posted (edited)

Yeah basically it is overfueling because the ECU is reading* air that isn't there.

On a side note, wtf are you clutching in around a corner? you should always go around corners in gear with clutch out.

Edited by bubba
syfon Veteran

syfon

Posted
Posted

This has just started happening on my car last night.

However the IDLE of my car is extremely rough. At idle, my car is missfiring that badly, it sounds like a 350 with the lumpiest possible cam it in. Yet while driving at anything above 1750RPM, it wont miss a beat.

Any ideas? I have read that it may be worth cleaning the AAC valve, however i do not believe that it is the coil packs or plugs, as if they were not funcitoning correctly, my car would missfire throughout the entire revrange. At idle, there is more resistance than while revving....

I have no idea why it wont idle properly/missfires like a b!tch....

syfon Veteran

syfon

Posted
Posted

Well it has been missfiring on idle for a few days last night, so i'm more concernced about that.

I have checked that, and all vacuum hoes are connected.....any other ideas lol?

Could it be my stock AFM is screwed?

syfon Veteran

syfon

Posted
Posted

New spark plugs went in about 1500-2000kms ago, copper plugs. Have always used NGK copper plugs (cant remember the code for the plug) and have never had any trouble.

AAC valve? Coil packs? Piston rings? I dont know what it could be >.<

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...