Jump to content
SAU Community

Recommended Posts

In street trim this car looks stock and meets all roadworthy checks but can put out over 400 awhp

Nur engine bought from Nissan

Nismo intake plenum

Nismo 600cc injectors

Nismo fuel pump

Nismo intercooler

Nismo upper arm link front and rear

Nismo A-arm

Nismo rear member bracket

Nismo rear member spacers

Nismo stabilizer

Nismo twin plate Gmax spec 2 clutch

Nismo front fender bracing (behind)

Nismo under floor reinforcement bar

Nismo master cylinder stopper

Nismo limited dash- (computer screen with live digital & analogue feedback)

Nismo 5 point harnesses

Tomei oil pan baffle plate

Tomei Metal head gasket

Tomei turbo outlet

Tomei full ECU

HKS GT-SS turbo KIT (600hp)

HKS oil cooler

HKS thermostat

HKS CAMP system ecu monitor

HKS ECV 3

HKS kansai reinforcement bar

MINES silent VX titanium pro exhaust (turbo to tip)

Mine's front pipe

MINES high flow cat

Trust intercooler piping kit

Blitz LMC series type-R radiator

Cusco front upper arm

Cusco tension rods

GARAGE DEFEND GT cooling panel

DO-LUCK rear cross bar

DO-LUCK gachiri support

Brembo F50 front brakes 2 piece rotors (gold hats)

Brembo F50 4 pot rears

Brembo stainless steel brakes lines

Project MU type -NR brake pads (new)

ARC rear magic wing (titanium)

OHLINS Coilover Suspension with Reservoir Tank

Final motion carbon fiber front lip

VOLK Racing LE37 17x9.5 forged rims (spare set with race rubber) or TE37 bronze

Advan AO48 255/40/17 Type S tyres

$50,000

Top left is picture on car

more pics to come

ohlins over nismo over brembo

or with TE37

oil cooler vent

comes with top of the range alarm

thinking about parting the car out let me know what parts your interested in and car will be almost stock at the end.

interior

as asked for

post-49143-1250635479_thumb.jpg

post-49143-1250635666_thumb.jpg

post-49143-1250636045_thumb.jpg

post-49143-1250636114_thumb.jpg

post-49143-1250636196_thumb.jpg

post-49143-1250636251_thumb.jpg

post-49143-1250804190_thumb.jpg

post-49143-1250844096_thumb.jpg

post-49143-1250844191_thumb.jpg

post-49143-1250844218_thumb.jpg

post-49143-1250844287_thumb.jpg

post-49143-1250844362_thumb.jpg

post-49143-1250844390_thumb.jpg

post-49143-1250908075_thumb.jpg

post-49143-1251009979_thumb.jpg

post-49143-1251010041_thumb.jpg

post-49143-1251884962_thumb.jpg

post-49143-1251885136_thumb.jpg

post-49143-1251885374_thumb.jpg

Edited by dan_the_man
Link to comment
https://www.sau.com.au/forums/topic/284059-1996-gtr-33-nur-spec-tomei-mod/
Share on other sites

holy shit this thing is awesome!!! does that Nismo dash give you feedback/info like the R34 GTR's that are mounted in the middle?? i have never seen this before...free bump dude...if i find 50k lying around somewhere u'll be expecting a call from me!

holy shit this thing is awesome!!! does that Nismo dash give you feedback/info like the R34 GTR's that are mounted in the middle?? i have never seen this before...free bump dude...if i find 50k lying around somewhere u'll be expecting a call from me!

Yes like the 34 GTR but has a few more options, its a HKS camp system and it has been wired into the tomei ECU and this nismo dash.

more pics to come

nice car mate, why are you selling everything off, there is no way you will make your money back, you would have easily spent more than 50k on this car alone???

nice clean car, should sell soon, also roughly how many k's?

  • 2 weeks later...

Hi,

I could be interested in acquiring some parts of the Car if you are still selling, in particular some of the NISMO products arm/bars etc... and also the do luck gear (i guess in general suspension/bracing items). Can you PM me with parts you would be willing to seperate and prices you would consider.

Nismo upper arm link front and rear

Nismo A-arm

Nismo rear member bracket

Nismo stabilizer

Nismo front fender bracing (behind)

Nismo under floor reinforcement bar

Nismo master cylinder stopper

GARAGE DEFEND GT cooling panel

DO-LUCK rear cross bar

DO-LUCK gachiri support

Thanks for your time.

Hi,

I could be interested in acquiring some parts of the Car if you are still selling, in particular some of the NISMO products arm/bars etc... and also the do luck gear (i guess in general suspension/bracing items). Can you PM me with parts you would be willing to seperate and prices you would consider.

Nismo upper arm link front and rear

Nismo A-arm

Nismo rear member bracket

Nismo stabilizer

Nismo front fender bracing (behind)

Nismo under floor reinforcement bar

Nismo master cylinder stopper

GARAGE DEFEND GT cooling panel

DO-LUCK rear cross bar

DO-LUCK gachiri support

Thanks for your time.

just working out prices

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...