Jump to content
SAU Community

Recommended Posts

In street trim this car looks stock and meets all roadworthy checks but can put out over 400 awhp

Nur engine bought from Nissan

Nismo intake plenum

Nismo 600cc injectors

Nismo fuel pump

Nismo intercooler

Nismo upper arm link front and rear

Nismo A-arm

Nismo rear member bracket

Nismo rear member spacers

Nismo stabilizer

Nismo twin plate Gmax spec 2 clutch

Nismo front fender bracing (behind)

Nismo under floor reinforcement bar

Nismo master cylinder stopper

Nismo limited dash- (computer screen with live digital & analogue feedback)

Nismo 5 point harnesses

Tomei oil pan baffle plate

Tomei Metal head gasket

Tomei turbo outlet

Tomei full ECU

HKS GT-SS turbo KIT (600hp)

HKS oil cooler

HKS thermostat

HKS CAMP system ecu monitor

HKS ECV 3

HKS kansai reinforcement bar

MINES silent VX titanium pro exhaust (turbo to tip)

Mine's front pipe

MINES high flow cat

Trust intercooler piping kit

Blitz LMC series type-R radiator

Cusco front upper arm

Cusco tension rods

GARAGE DEFEND GT cooling panel

DO-LUCK rear cross bar

DO-LUCK gachiri support

Brembo F50 front brakes 2 piece rotors (gold hats)

Brembo F50 4 pot rears

Brembo stainless steel brakes lines

Project MU type -NR brake pads (new)

ARC rear magic wing (titanium)

OHLINS Coilover Suspension with Reservoir Tank

Final motion carbon fiber front lip

VOLK Racing LE37 17x9.5 forged rims (spare set with race rubber) or TE37 bronze

Advan AO48 255/40/17 Type S tyres

$50,000

Top left is picture on car

more pics to come

ohlins over nismo over brembo

or with TE37

oil cooler vent

comes with top of the range alarm

thinking about parting the car out let me know what parts your interested in and car will be almost stock at the end.

interior

as asked for

post-49143-1250635479_thumb.jpg

post-49143-1250635666_thumb.jpg

post-49143-1250636045_thumb.jpg

post-49143-1250636114_thumb.jpg

post-49143-1250636196_thumb.jpg

post-49143-1250636251_thumb.jpg

post-49143-1250804190_thumb.jpg

post-49143-1250844096_thumb.jpg

post-49143-1250844191_thumb.jpg

post-49143-1250844218_thumb.jpg

post-49143-1250844287_thumb.jpg

post-49143-1250844362_thumb.jpg

post-49143-1250844390_thumb.jpg

post-49143-1250908075_thumb.jpg

post-49143-1251009979_thumb.jpg

post-49143-1251010041_thumb.jpg

post-49143-1251884962_thumb.jpg

post-49143-1251885136_thumb.jpg

post-49143-1251885374_thumb.jpg

Edited by dan_the_man
Link to comment
https://www.sau.com.au/forums/topic/284059-1996-gtr-33-nur-spec-tomei-mod/
Share on other sites

holy shit this thing is awesome!!! does that Nismo dash give you feedback/info like the R34 GTR's that are mounted in the middle?? i have never seen this before...free bump dude...if i find 50k lying around somewhere u'll be expecting a call from me!

holy shit this thing is awesome!!! does that Nismo dash give you feedback/info like the R34 GTR's that are mounted in the middle?? i have never seen this before...free bump dude...if i find 50k lying around somewhere u'll be expecting a call from me!

Yes like the 34 GTR but has a few more options, its a HKS camp system and it has been wired into the tomei ECU and this nismo dash.

more pics to come

nice car mate, why are you selling everything off, there is no way you will make your money back, you would have easily spent more than 50k on this car alone???

nice clean car, should sell soon, also roughly how many k's?

  • 2 weeks later...

Hi,

I could be interested in acquiring some parts of the Car if you are still selling, in particular some of the NISMO products arm/bars etc... and also the do luck gear (i guess in general suspension/bracing items). Can you PM me with parts you would be willing to seperate and prices you would consider.

Nismo upper arm link front and rear

Nismo A-arm

Nismo rear member bracket

Nismo stabilizer

Nismo front fender bracing (behind)

Nismo under floor reinforcement bar

Nismo master cylinder stopper

GARAGE DEFEND GT cooling panel

DO-LUCK rear cross bar

DO-LUCK gachiri support

Thanks for your time.

Hi,

I could be interested in acquiring some parts of the Car if you are still selling, in particular some of the NISMO products arm/bars etc... and also the do luck gear (i guess in general suspension/bracing items). Can you PM me with parts you would be willing to seperate and prices you would consider.

Nismo upper arm link front and rear

Nismo A-arm

Nismo rear member bracket

Nismo stabilizer

Nismo front fender bracing (behind)

Nismo under floor reinforcement bar

Nismo master cylinder stopper

GARAGE DEFEND GT cooling panel

DO-LUCK rear cross bar

DO-LUCK gachiri support

Thanks for your time.

just working out prices

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...