Jump to content
SAU Community

Recommended Posts

In street trim this car looks stock and meets all roadworthy checks but can put out over 400 awhp

Nur engine bought from Nissan

Nismo intake plenum

Nismo 600cc injectors

Nismo fuel pump

Nismo intercooler

Nismo upper arm link front and rear

Nismo A-arm

Nismo rear member bracket

Nismo rear member spacers

Nismo stabilizer

Nismo twin plate Gmax spec 2 clutch

Nismo front fender bracing (behind)

Nismo under floor reinforcement bar

Nismo master cylinder stopper

Nismo limited dash- (computer screen with live digital & analogue feedback)

Nismo 5 point harnesses

Tomei oil pan baffle plate

Tomei Metal head gasket

Tomei turbo outlet

Tomei full ECU

HKS GT-SS turbo KIT (600hp)

HKS oil cooler

HKS thermostat

HKS CAMP system ecu monitor

HKS ECV 3

HKS kansai reinforcement bar

MINES silent VX titanium pro exhaust (turbo to tip)

Mine's front pipe

MINES high flow cat

Trust intercooler piping kit

Blitz LMC series type-R radiator

Cusco front upper arm

Cusco tension rods

GARAGE DEFEND GT cooling panel

DO-LUCK rear cross bar

DO-LUCK gachiri support

Brembo F50 front brakes 2 piece rotors (gold hats)

Brembo F50 4 pot rears

Brembo stainless steel brakes lines

Project MU type -NR brake pads (new)

ARC rear magic wing (titanium)

OHLINS Coilover Suspension with Reservoir Tank

Final motion carbon fiber front lip

VOLK Racing LE37 17x9.5 forged rims (spare set with race rubber) or TE37 bronze

Advan AO48 255/40/17 Type S tyres

$50,000

Top left is picture on car

more pics to come

ohlins over nismo over brembo

or with TE37

oil cooler vent

comes with top of the range alarm

thinking about parting the car out let me know what parts your interested in and car will be almost stock at the end.

interior

as asked for

post-49143-1250635479_thumb.jpg

post-49143-1250635666_thumb.jpg

post-49143-1250636045_thumb.jpg

post-49143-1250636114_thumb.jpg

post-49143-1250636196_thumb.jpg

post-49143-1250636251_thumb.jpg

post-49143-1250804190_thumb.jpg

post-49143-1250844096_thumb.jpg

post-49143-1250844191_thumb.jpg

post-49143-1250844218_thumb.jpg

post-49143-1250844287_thumb.jpg

post-49143-1250844362_thumb.jpg

post-49143-1250844390_thumb.jpg

post-49143-1250908075_thumb.jpg

post-49143-1251009979_thumb.jpg

post-49143-1251010041_thumb.jpg

post-49143-1251884962_thumb.jpg

post-49143-1251885136_thumb.jpg

post-49143-1251885374_thumb.jpg

Edited by dan_the_man
Link to comment
https://www.sau.com.au/forums/topic/284059-1996-gtr-33-nur-spec-tomei-mod/
Share on other sites

holy shit this thing is awesome!!! does that Nismo dash give you feedback/info like the R34 GTR's that are mounted in the middle?? i have never seen this before...free bump dude...if i find 50k lying around somewhere u'll be expecting a call from me!

holy shit this thing is awesome!!! does that Nismo dash give you feedback/info like the R34 GTR's that are mounted in the middle?? i have never seen this before...free bump dude...if i find 50k lying around somewhere u'll be expecting a call from me!

Yes like the 34 GTR but has a few more options, its a HKS camp system and it has been wired into the tomei ECU and this nismo dash.

more pics to come

nice car mate, why are you selling everything off, there is no way you will make your money back, you would have easily spent more than 50k on this car alone???

nice clean car, should sell soon, also roughly how many k's?

  • 2 weeks later...

Hi,

I could be interested in acquiring some parts of the Car if you are still selling, in particular some of the NISMO products arm/bars etc... and also the do luck gear (i guess in general suspension/bracing items). Can you PM me with parts you would be willing to seperate and prices you would consider.

Nismo upper arm link front and rear

Nismo A-arm

Nismo rear member bracket

Nismo stabilizer

Nismo front fender bracing (behind)

Nismo under floor reinforcement bar

Nismo master cylinder stopper

GARAGE DEFEND GT cooling panel

DO-LUCK rear cross bar

DO-LUCK gachiri support

Thanks for your time.

Hi,

I could be interested in acquiring some parts of the Car if you are still selling, in particular some of the NISMO products arm/bars etc... and also the do luck gear (i guess in general suspension/bracing items). Can you PM me with parts you would be willing to seperate and prices you would consider.

Nismo upper arm link front and rear

Nismo A-arm

Nismo rear member bracket

Nismo stabilizer

Nismo front fender bracing (behind)

Nismo under floor reinforcement bar

Nismo master cylinder stopper

GARAGE DEFEND GT cooling panel

DO-LUCK rear cross bar

DO-LUCK gachiri support

Thanks for your time.

just working out prices

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...