Jump to content
SAU Community

Recommended Posts

Well as some of you may or may not know... a month or two ago my R33 was hit in the ass while i was parked at a red light.

after that incident the car ended up like this:

post-39016-1250761162_thumb.jpg

post-39016-1250761195_thumb.jpg

I then sold the car onto a friend who has taken to attempting to fix it up to use as a drift/track car or even re register it and drive it.

His progress so far:

1. Cut into bits

post-39016-1250761283_thumb.jpg

2. bent up boot floorpan replaced

post-39016-1250761334_thumb.jpg

3. Shell re-attached and taced on

post-39016-1250761409_thumb.jpg

post-39016-1250761446_thumb.jpg

Still alot of work to go yet obviously, but its coming along nicely

I was estimated $8000 - $11000 to have this repaired at a body shop.

So far he has spent $500 on a quarter cut from a wreckers and a fair few days of his time.

Next step is full weld up, grind back, then a million hours of sanding.

Just thought some of you guys might be interested as i think he's done a top job so far. (he has never attempted any body work bar flaring guards with a guard roller before)

Cheers

Steve

Link to comment
https://www.sau.com.au/forums/topic/284301-the-restoration/
Share on other sites

real nice job he's doing there

only suggestion i can make is to take more paint off around the joins before welding, dont want any weaknesses introducted through impurities in the weld

that and the normal tack move tack move process for panel welding.

hope it all works out clean

Link to comment
https://www.sau.com.au/forums/topic/284301-the-restoration/#findComment-4779668
Share on other sites

I did this to my silvia when i crashed it in the hills. joins between the rear taillights and half way down the left qtr panel... Like said above make sure you take your time with the welding... .8 sheet is too easy to warp... if you have a tig it's much easier... when your done make sure you seal the inside with zinc fortified paint or alike (and any panels that are to be spot welded back at the seams must be painted before they are joined..)

It's really not all that hard if you use common sense. best for me was finding a silvia at U-pull it. so got the whole qtr for $88 :P . cost me les than $130 all done with spray can paint (still needs a proper paint job but...)

Good that you can take some time over it, i had to get mine done in one sunday!!

Link to comment
https://www.sau.com.au/forums/topic/284301-the-restoration/#findComment-4781651
Share on other sites

no idea man haha, he seems to be doing alright though.

I'll ask him about it when i see him next though.

im pretty sure he's using it with gas but im not 100%

Wow, good shiz!

How good is your friend finding the CigWeld mig for welding body panels? I'm assuming you are using it with gas?

They are quite good value units, I am curious to see how good they are!

he's also looking for a rear windscreen, so if anyones got one let me know! cheers

Edited by stenve
Link to comment
https://www.sau.com.au/forums/topic/284301-the-restoration/#findComment-4804085
Share on other sites

  • 1 month later...

been a while since i've thrown up an update so heres where it's at now:

its all sanded back smooth and joined and aligned and in undercoat

post-39016-1254824504_thumb.jpg

front bar got a redoing as well

post-39016-1254824555_thumb.jpg

it cost him something like $400 for 2 litres of paint or something insane

Its a 3 step system which involves a silver base coat

then a diluted layer of green so it isnt so opaque and the silver shines through to create the gold pearl.

then the clear coat.

He's a bit scared to paint it now because he has to blend and somehow try to replicate the same green colour with his mixture.

any tips?

Link to comment
https://www.sau.com.au/forums/topic/284301-the-restoration/#findComment-4865220
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...