Jump to content
SAU Community

Recommended Posts

If you have been looking at R31s, you DO have to remember to take into account that they are between 20-25 years old now...
Yeah, I think I might just have to give up on the idea.

And like I said in the post above yours, it's hard to find ones without problems and don't need a lot of work and maintenance.

Back to the drawing board. :D

They will require ongoing maintenance (as would the Stagea - or any car for that matter), but an R31 is a great first car and a good way to learn how to look after your car.

I had one as a second car (VH Commo was my first - I put it through hell for 4 years).

R31's have plenty of room to work on and a fairly large community here in Vic that can help out with any q's you have.

If you do go the R31 route, maybe talk to Classic Skyline's Australia (don't have their details on me), great group of guys/gals who really love their R31's.

As the others have said, wait until you are off your P's (do some driving courses during that time), then get your Stagea.

At the end of the day its up to him if he wants to head down the Stagea road or not... I've owned a VL Calais Turbo, VS HSV Senator and now the Nissan Stagea whilst on my P's and the only car i ever copped Police attendtion in was the VL.. Today i spotted a Red P Plater in a brand new Saab 93 2.0 Turbo and seen plenty of others in turbo's aswell... if you do decide to go a Steaga and get pulled over just keep a tube of anal lube in your glove box...

I'm guessing that one is being sold by Paul aka performance-wise on these forums.

ive said it before...

green stagea's are hideous

Hate to be rude,Rodney! Wash your mouth out.

Should I :D him, Hugh?

haha im sorry hugh

id like to apologise to all the fellow green stagea drivers out there

the lager said it,not me ;)

Hahaha, you're lucky! :)

my suggestion is

get a cheap car to as your first car as you willl most likely crash or damage it

learn how to drive

get off your P's and then get a turbo charged car

a stock stagea is slower than a V6 commodore or a 4L foulcan, its not some turbo RWD thing with a snappy chassis like an S13...(this is why mine is not stock)

I have never been pulled over in vic on my p's, this car was made to be steathy, and I would recommend it to a P plater... stealth exhaust, stock rims etc. I have been through defect busses on cruises and they asked me if i was with the other cars... To me, that passes the ninja test.

I have driven the stagea for the past 2years of my p's, and had stupid cars for the first year of my p's, if i could do it again, i would of had the stagea from day 1 of my p's. Its a safe car, with a sensible driver who listens to the car and doesnt let it do all the driving, they will be fine.

Just dont fit a cannon and bling rims!

Edited by RB_Ryan
a stock stagea is slower than a V6 commodore or a 4L foulcan, its not some turbo RWD thing with a snappy chassis like an S13...(this is why mine is not stock)

I have never been pulled over in vic on my p's, this car was made to be steathy, and I would recommend it to a P plater... stealth exhaust, stock rims etc. I have been through defect busses on cruises and they asked me if i was with the other cars... To me, that passes the ninja test.

I have driven the stagea for the past 2years of my p's, and had stupid cars for the first year of my p's, if i could do it again, i would of had the stagea from day 1 of my p's. Its a safe car, with a sensible driver who listens to the car and doesnt let it do all the driving, they will be fine.

Just dont fit a cannon and bling rims!

Bummed to see yours is a manual. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...