Jump to content
SAU Community

R25 Cam Belt = RB20 Cam Belt (Says Nissan)?!?!

Cubes

By Cubes,
in General Maintenance

 Share

Recommended Posts

Cubes Grand Master

Cubes

Posted
Posted

Well I am going to have another crack at doing the cam belt this weekend as I'm pretty sure i''ll be able to get the harmonic balancer off.

SO..

I drove down to nissan and asked about a Cam Belt to suit a RB20DET.

They Quoted $105.

Idler $290. :confused:

Tensioner $100.

I hope my Idler Is ok.. :|

I asked about a part number and he said that it is the same as the RB25DET but was not really willing to hand out a part number.

Can any one confirm this?

Dayco belts are around the $80 mark.

If not well i'll have to persist until he gives me the part number.

meggala Grand Master

meggala

Posted
Posted

these are the only ones I have ask on sdu some one there will have a part number. these are only for the rb25 I thoough the cambelt on the rb20 would be alittle shorter as block is higher

if you find the rb20 on e let me know please and I'll add it

cheers

meggala

Timing Belt:-

13028-20P25 8/93 to 2/98

13028-5L327 2/98 onwards

Cubes Grand Master

Cubes

Posted
  • Author
Posted

Damn Nissan Bloke sending me up the garden path :D

He said that they get so many enquiries that it is becoming annoying.

Yer I'll post on SDU..

I might just go get the Nissan One as I need it Tomorrow and Saturday you cannot get parts.. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...