Jump to content
SAU Community

Recommended Posts

Selling my RB30 + Turbo set up

This was built by myself and dad (mechanic), block work done by Westend performance and tuning by Tom and BD4s

Engine has ran flawlessly for the past 4000km and a lot of good parts have gone into it..

Car ran in on 230rwkw and ran for about 1000km with 270rwkw with the small 8cm rear housing turbo

This will fall into an gtst with no issue.

Off the top of my head parts & work done:

Rb25de head (rare r32 head, no VCT)

Reco rb30 block (bore, hone, acid dip etc etc)

Reco rb30 crank (crack test, linish etc etc)

Cp pistons 9:1

Restrictors in block

Reco head

Gtr valve springs

Cpc custom plenum with billet throttle body (will come with acc cable to work in gtst also master cylinder to provide room)

Gates powergrip timing belt

New waterpump

Recondition oil pump

Crank shaft collar

Tomei cam gears

All new gaskets

Tomei head gasket

New tensioners

New king bearings, all replaced

Powder coated cam shaft covers with welded -10 bungs

Reco power steering pump

Hks fconV pro with map and air temp sensor

Gtr injectors

Price 5.5k

I'm sure there parts i've forgotten to list also

TD06 20g with 8cm read housing

Had this set up previously on my rb20 and made 260rwkw

anyone with it will tell you its one of the best rb20 set ups you can buy.

comes with:

recondition Td06 20g turbo 8cm rear housing

new front comp wheel

Front dump pipe

Oil line

Custom exhaust manifold

braided drain pipe

Tial 38mm Wastegate

Price $1.7k

If you want the turbo set up + motor i can provide a good price

extra parts i can sell to make the install easier are:

Custom power steering reservoir with lines and earls fittings

Custom radiator over flow bottle

Apexi pod filter

UAS catch can with light weight braided hose

rb20 gear box in good condition

Everything is in sydney and i prefer pick up..

Make an offer if you like but nothing stupid.

Thanks

John

Edited by silver gts-t
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...