Jump to content
SAU Community

Recommended Posts

Hey all,

Selling of parts from my R32 GTR, had engine bottom end failure so parting out. Make me some offers on the below :

Whats left :

The interior is pretty much all there EXCEPT for front seats, gear knob and door trim (doors are gone)

Front bar is gone as are the doors and boot lid, the gear box and front bar are gone.

So if it's not on the list below tell me what you're looking for and I will let you know if I have it... most likely will.

RB26DETT head (just been freshened up) $1800 complete.

Igniter pack $50

GTR turbo's, High Flowed BB Steel wheels. never boosted above 6 pounds.

ABS unit $offer?

NFU Coil overs Hight Adjustable (AWESOME ride the car handled like it was on rails) $1000

Stock GTR Cooler $100

Bonnet $550

grill $150

Rear seats (stitching loose up the top on one side) $offer?

Carpet all in good condition : $100

BRAKES : GTR Calipers, NEW DBA slotted rotors (just enough time to run my motor in and blow it up, so about 6000k's on them with no really hard breaking. new break pads (cant remember what brand they are, they are dirty pads but the stop hard. $1000 obo.

Vents left & centre -- $150 pair or $80ea

lower control arms -- $120

castor rods -- $100

Afm’s green label -- $100 ea

tail lights -- $150pair

indicators -- $75pair

3 inch exhaust all the way through (it’s flowy but pretty loud) -- $250

Complete engine harness. Price $250.00

Complete Chassis wiring from the head light to rear lights all fuse boxs etc. Price. $300.00

Gtr dash (buble in the usual spot but in great condition otherwise - $80

Gtr steering colum with ignition barrel. -$150

Gtr brake booster. - $60

Gtr clutch master cylinder with booster. - $50

Gtr brake and clutch pedals. - $30 each

Gtr front upper camber arms. - $100 pair

Gtr front castor arms. - $50 pair

Gtr heater box. - $70 fan - $30

Gtr centre gauges. - $50

Gtr power steering rack. - $100

Gtr power steering pump. - $50

Edited by BlackR32
Link to comment
https://www.sau.com.au/forums/topic/285984-32-gtr-parts-for-sale/
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

hey there,i will take the igniter pack, can u pm your details and price to post to goldcoast,thanks mate

Hey all,

Selling of parts from my R32 GTR, had engine bottom end failure so parting out. Make me some offers on the below :

Whats left :

The interior is pretty much all there EXCEPT for front seats, gear knob and door trim (doors are gone)

Front bar is gone as are the doors and boot lid, the gear box and front bar are gone.

So if it's not on the list below tell me what you're looking for and I will let you know if I have it... most likely will.

RB26DETT head (just been freshened up) $1800 complete.

Igniter pack $50

GTR turbo's, High Flowed BB Steel wheels. never boosted above 6 pounds.

ABS unit $offer?

NFU Coil overs Hight Adjustable (AWESOME ride the car handled like it was on rails) $1000

Stock GTR Cooler $100

Bonnet $550

grill $150

Rear seats (stitching loose up the top on one side) $offer?

Carpet all in good condition : $100

BRAKES : GTR Calipers, NEW DBA slotted rotors (just enough time to run my motor in and blow it up, so about 6000k's on them with no really hard breaking. new break pads (cant remember what brand they are, they are dirty pads but the stop hard. $1000 obo.

Vents left & centre -- $150 pair or $80ea

lower control arms -- $120

castor rods -- $100

Afm's green label -- $100 ea

tail lights -- $150pair

indicators -- $75pair

3 inch exhaust all the way through (it's flowy but pretty loud) -- $250

Complete engine harness. Price $250.00

Complete Chassis wiring from the head light to rear lights all fuse boxs etc. Price. $300.00

Gtr dash (buble in the usual spot but in great condition otherwise - $80

Gtr steering colum with ignition barrel. -$150

Gtr brake booster. - $60

Gtr clutch master cylinder with booster. - $50

Gtr brake and clutch pedals. - $30 each

Gtr front upper camber arms. - $100 pair

Gtr front castor arms. - $50 pair

Gtr heater box. - $70 fan - $30

Gtr centre gauges. - $50

Gtr power steering rack. - $100

Gtr power steering pump. - $50

Replying to all questions above by PM now.

however, the front guards are already gone sorry.

Have an aftermarket exhaust system not the standard one.

Yes my car is the abs model and the kit is still all there.

hey mate, wats the condition of the indicators, could u pm me a pic. if good i will take them if u will post to whyalla s.a 5600

Edited by ballsdeepgtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...