Jump to content
SAU Community

Recommended Posts

Price: $7,700 - QUICK SALE

Km's: 135xxx

Colour: Gunmetal Grey

MANUAL

Rego: NOV-2009

This car has been extremely well looked after with impeccable service history and complete Australian Logbooks. The car is in very original condition. The only additional features are a GReddy Radiator Cap, Blitz turbo timer and a Kakimoto exhaust. Bridgestone Potenza RE001 all round, changed July (98% tread).

The original paintwork is in great condition. There are some tiny scratches, normal for a car of this age with the original paint. Overall, the paint is very shiny and even all round. You can see from the photos that the car is very straight and has never been in an accident. The car is always garaged.

The interior is also in superb condition. The seats are all clean and do not have any cuts or tears. There are no cigarette burns. All electrics are working, fog lights work. The climate control system cools and heats perfectly. Pioneer CD player with remote.

The car is extremely reliable and mechanically A1. It has only 135xxxkms, with timing belt changed at 100,000kms. The engine oil was recently changed (3,000kms ago) to Royal Purple, Genuine Nissan Oil filter. I have receipts to verify ALL work that has been completed on this car. The car has no oil leaks, though a coolant leak was discovered in one of the back hoses, but that has been rectified, coolant is now fresh and nice slimey green.

Selling my beloved car as I need to pursue my dreams on 2 wheels.

QUICK SALE $7,700 - NEED BIKE

CALL 0401 580 039

JOHNNY

THORNLEIGH MACCAS

Edited by trueryu
Link to comment
https://www.sau.com.au/forums/topic/286478-nsw-1992-skyline-hcr32-gts-t-7700/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...