Jump to content
SAU Community

Recommended Posts

after a turbo good for a responsive 200+ kw from an rb20

vg30

rb25

op6

hks turbo at right price.

dont want to spend more than 1k on a 2nd hand turbo.

also interested in blown/broken turbos.

cheers

after a turbo good for a responsive 200+ kw from an rb20

vg30

rb25

op6

hks turbo at right price.

dont want to spend more than 1k on a 2nd hand turbo.

also interested in blown/broken turbos.

cheers

i have a turbo that i dont need it has a blown rear main seal thats all that has to be changed for it to work its a kkr-430 that has had the waste gate flap machined out to stop boost spike has braided line

oil cooled any more info pm-me whats your location.

after a turbo good for a responsive 200+ kw from an rb20

vg30

rb25

op6

hks turbo at right price.

dont want to spend more than 1k on a 2nd hand turbo.

also interested in blown/broken turbos.

cheers

hey mate

i have r34 turbo for sale

good cond $400

see post

http://www.skylinesaustralia.com/forums/R3...56#entry4807456

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...