Jump to content
SAU Community

Recommended Posts

Alright guys, i imported these in from Japan a while back, but looking to move on.

These are an Italian wheel made for GTR's, for anyone who's been living under a rock, OZ Racing are one of the biggest race wheel manufacturers. not many, if any other manufacturers match the racing credentials of OZ. they supply the wheels for racing across the world including WRC, F1, Le'mans.

Anyway these wheels look the biz, suit pre-2000 cars mint, and they are an awesome performing wheel, extremely strong.

Specs:

17x9 +24

5x114.3

brake clearance for 4-pot 32 brakes.

Condition: no noticeable scratches, no bends/breaks or any structural damage.

as far as tyres are concerned, this can be negotiated, right now they have eagle F1's on the front which are about half worn, and worn neutons at the rear, but can supply them with brand new tyres for you, or something 2nd hand for less.

Fitment: these will fit a massive range of cars, all turbo skylines, S14/S15 silvias etc etc. these are designed to fit GTR's but sit real tough on GTS-t's and S14/S15's.

Price:

$1600 with 2nd hand tyres with around 80% tread.

$1900 with brand new tyres (neutons, 235/45's or 215/45's)

Located in SA, can post interstate, around $200 to vic/nsw, bit more to QLD/WA etc.

here's a pic:

wallpaperuf.jpg

Link to comment
https://www.sau.com.au/forums/topic/286842-o-z-r-a-c-i-n-g-w-h-e-e-l-s/
Share on other sites

  • 1 month later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...