Jump to content
SAU Community

Recommended Posts

I have been looking at coilover setups ranging from KSport, Tein, and Driftworks to a spring/dampener setup using Eibach springs or similar with Bilstein or KYB AGXs. Any thoughts on this? I am not into grip nor drifting, but do take the occasional spirited drive.

Link to comment
https://www.sau.com.au/forums/topic/287223-r32-gts-t-suspension-is-shot/
Share on other sites

Heaps of topics on this; but if you just take the 'spirited drive' might not be worth even going for coilovers. A good spring/shock combo will do you just fine and be miles more comfortable on the street than most readily available coilovers. (Read: Jap)

I understand that this may have sounded like a newb question, but as a veteran user on other sites I frequent information is either vague, too general, or just not readily available. What I *did* get a lot of is "Ask the guys on Skylines Australia. They have plenty of people with experience with this." So here I am.

Meanwhile, I have gone through a number of articles on the sight and have seen some extensive threads on the R33 GTS-T suspension setups, but not nearly as many on the R32 as I had hoped. Of course, the lateness of the hour here (U.S.) in my original searching probably impaired my sleuthing abilities. Perhaps I am just not looking in the right places. Nevertheless...

It is my understanding that the suspension on the GTS-T is slightly different than the GT-R, but shares the same subframe as the S13. Is this correct? If so, that certainly helps in some of my searching. While coilovers are offer a solid performance base (and even some baller status depending on make/model coilover), is there no spring/shock combo that works? I am certainly not opposed to a coilover setup though. Obviously, my greatest hurdle to overcome is the availability of parts/aftermarket parts for the Skyline. I figure with the vast experience on this site with the R32 GTS-T that undoubtedly someone has had the experience to share.

I look forward to your informative replies.

Thank you in advance.

Basically, the rules that apply to R33s will be applicable to R32s.

IMO, "coilover" suspension, ie infinitely adjustable ride height, is unnecessary for the average road car. You have to corner weight the car for them to be really effective. And they are generally extremely stiff / firm.

I have Bilsteins with Kings lowered springs on my 32 GTS4. The Bilsteins have several grooves to set ride height. They are more than adequate as an upgrade from OEM.

Might I suggest you contact Quadrant Suspensions (www.quadrantsuspensions.com.au/ ) in Melbourne, or Whiteline (www.whiteline.com.au) in Sydney, about their setups. I think Quadrant recommend Eibach springs, Whiteline do Kings. Also, there was a group buy about 12 months ago for Bilstein / Kings packages - search through the for sales area, posted by "Sydneykid".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...