Jump to content
SAU Community

550cc's, Moonface Mf-r Dump/front, Recaro, R33 Gtr Interior, Tomei Hicas Lock Kit, Slotted Rotors, Nardi, Ohlins, Ganadors, Cusco Arms, Gfb Stealth Fx


Recommended Posts

Well im sick of renting and I have seen a house I would like to purchase so its time to strip my R33. Yes I have only just finished it and have spent an absolute fortune building it using the best parts available but if there is enough interest in the following parts I will strip it all down with most parts removable the day a buyer wants them.

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

USA Python Brand 550CC Side Feed Injectors x 6 to suit RB25, SR etc complete in original box. These were used on my car complete with the Apexi Turbo setup I recently removed and sold. They are a straight fit injector with no modifications needed to fit. Price - $500

550injector.th.jpg550injectorcloseup.th.jpg

Moonface MF-R Stainless Dump and Front Pipe to suit R32 R33 Stagea. Unique and extremely high flowing dump/front setup with excellent ground clearance due to design and distinctive engine note. Bought new and used for a few dyno runs on my just finished car still comes with the original Moonface gaskets and bolt kit + stickers. These are rare to find here in Oz and are $907 from Nengun at the moment http://www.nengun.com/moonface/exhaust-chamber-pro Price - $550

moonfaceside.th.jpgmoonfacelength.th.jpgmoonfaceturboflange.th.jpg

3" RB Stainless Front Pipe - suit RB20/RB25 complete with gearbox mounting bracket. Price - $100

polishedintakepipekit.th.jpg

PFC Datalogit interface complete with software, USB adaptor etc. This is the latest version that will work on any Power FC. Price - $475

datalogit.th.jpg

Sard Torque Control Valve - replaces your cat and gives excellent improvements in down low torque and also seems to decrease lag. Similar to the down low torquey feeling when you put a silencer in your cannon but with a silencer you have no power up top. With the SARD valve you have heaps of power all the way through the rev range. Price - $300

The picture shows the part that initially restricts flow to increase torque and is spring loaded so it slides back as the exhaust pressure increases to give 3.5" straight through pipe flow!

sardtorquecontrolvalve.th.jpgsardtorquecontrolvalves.th.jpg

Tomei HICAS Lock Kit to suit HICAS vehicles. The kit is used but still in good condition and easy to install. Price - $120

tomeilockkit.th.jpg

Brand New in box Attain HICAS Lockbar high quality solid Japanese HICAS Lockbar perfectly safe unlike the many cheaper unsafe/flexing china spec ones. Price - $175

attainhicasall.th.jpg

Full R33 GTR Interior in excellent condition including front and rear seats + front and rear door trims/cards. Price - $1400

Polished Intake Pipe Kit to suit RB motors was removed from RB25 but should fit RB20. The intake pipe majorly enhances induction noise and features provision for air intake temp sensor Price - $140

polishedintakepipekit.th.jpg

R33 UAS Carbon Fibre Vented Bonnet complete with Sparco Racing bonnet pins. Price - $600

Mint Genuine Recaro SR3 Reclinable Race Seat complete with genuine base frame ready to bolt into R32 R33 R34 Cefiro and with a small bracket these would fit S13-S14. As the seats are Recaro complete with Recaro Base Frames I have had no problems with defects and these seats having rolled through regency with them. Price - $500 FIRM

recarodrivers.th.jpg

Brand New DBA 4000 Slotted Rear Rotors model 4908SL/R to suit R33 GTS-t, R34 GT-T, R32 GTR + others. Price - $280

r34rearrotorsboxes.th.jpgr34rearrotors.th.jpg

Front R34 GT-T Slotted Rotors used very low kms but in excellent condition and freshly machined.Price - $200

r34frontslottedrotors.th.jpg

OR BUY BOTH FRONT AND REAR ROTORS FOR $425

Brand New (Just trial fitted) Front Greenstuff Brake Pads to suit R33 GTS-T R34 GT-T R32GTR WRX etc - $125

ebcgreenstuff.th.jpg

R33 Genuine Ganador Mirrors painted black ready to fit, can be painted any colour to suit your car - $450

r33ganadorside.th.jpgr33ganadorsidel.th.jpgr33ganadorinsider.th.jpgr33ganadorinsidel.th.jpg

Cusco Front Camber Adjustable Upper Arms suit R33 R34 Stagea barely used in excellent condition. Price - $425

Cusco Rear Camber Adjustable Upper Arms suit R33 S14 in excellent condition - Price - $280

cuscoreararmflat.th.jpgcuscoreararmside.th.jpgcuscoreararmjoints.th.jpg

Front Pair of Cusco Pillow Ball Upper Mounts to suit R32 R33 R34 & C34. The mounts are complete in box with manuals etc having only been trial fitted before changing suspension setup for the third time. The Cusco pillow ball upper mounts enable improved steering performance, stability and braking. Features: Controls unwated forces during acceleration, braking and cornering +

Improves steering response and performance, increasing stability during turn in and braking. Price - $180 (Cost $353 from Nengun)

cuscocambertops.th.jpg

R34 GT-T Stock Mags complete with new 225/45/17 rubber all round and all centre caps. Price - $500

Nardi Steering wheel in excellent condition complete with boss kit to suit R33 - Price $200

nardi.th.jpgnardihornbuttonnardilog.th.jpg

GFB Stealth FX BOV kit complete with trumpet and normal BOV adaptors. Currently has the universal adaptor fitted also have a S15 adaptor kit I can supply with it for free Price - $300

R33 Series 2 Front Bar in black complete with the rare Nismo Lower Lip. Price - $400

r33frontbarwithnismolipb.th.jpgr33frontbarwithnismolip.th.jpg

Apexi Pen Turbo Timer as new complete in box bought from Autobarn and as such has english manuals aswell as jap. Price - $100 Delivered

apexipenkit.th.jpg

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

Edited by nigelswazi
man u got some nice stuff there!!!!!!!!!!!!!!!!! wish i had money for it!!!

Thanks mate I spent years looking for the right bits to make a sweet street R33 some of the best bits aren't even listed in this thread as they have sold already.

----------------------------------------------------------------------------------------------------

The following parts are now sold pending payment

SARD Torque Control Valve

DBA 4000 Rear Rotors

Cusco Front Camber Arms

Cusco Rear Camber Arms

----------------------------------------------------------------------------------------------------

Forgot to add the following:

R33 GTS-T Ohlins Rear Damper Adjustable Shocks and Springs. These shocks feature massive inverse monotube inserts. Price - $450 Pair

Brand New Bodyform 400R Rear Bar and Side Skirts these people make the best fitting and highest quality kits hand made in Australia. Cost $950 + postage with receipt of purchase. Price - $800

Brand New R33 PSI Parts Du-Luck Rear Bar and Side Skirts cost $846 with receipt of purchase. Price - $400

How much for both the Cusco arms and pillow ball mounts?

Do me a deal?

PM me :yes:

Sorry mate the Cusco Arms are now confirmed sold payment has been received

PM sent with offer for the pillow ball mounts

----------------------------------------------------------------------------------------------------

Apexi Carbon Fibre Strut Brace now sold pending payment Sat

Edited by nigelswazi

Damn... Wasn't quick enough :yes:

Id the sale falls through on the arms, let me know. That's what I was really interested in.

are u sure that intake pipe will fit up to an rb20? ive got a pod on mine but it goes into a custom air box... so it can be moved abit doesnt need to be in the standard position...

Sorry DRD-00F, I must have just got in before you this morning. Money has been deposited for them.

Ooooooh, now we're enemies :whistling:

Spose I'll just go buy something else :(

Hey man,nice stuff....If still available will take the Python injectors as well as Rear camber adust. upper arms. Cheers

are u sure that intake pipe will fit up to an rb20? ive got a pod on mine but it goes into a custom air box... so it can be moved abit doesnt need to be in the standard position...

Should fit fine the RB20 and RB25 stock pipes are very similar anyway.

hey mate pm sent about seat not sure if you got it?

Hi mate,

Sorry the 5 minute timer between PM's meant you were about 30 mins away from a reply had a lot of PM's come in today regarding parts.

Sorry the word seats is a typo should read seat. It is just one driver seat for sale originally there were two but the passenger side already sold

-----------------------------------------------------------------------------------------------------

Apologies the picture of the front pipe has stuffed up and its showing the picture of the intake pipe kit.

Edited by nigelswazi

Sorry for confusion, if it has caused any, but just had someone pm about the Moonface dump stating im lying about the price and its only $747 on Nengun.

If you are not logged into Nengun it only shows you the price of the item not the actual delivered price you would have to pay if you wanted to buy the item. If you log into Nengun the price is as follows:

Product Price Delivered

MFP-EC04 Nissan - Skyline - HCR32 RB20DET - ECR33 RB25DET AU $ 747.23 AU $ 899.86

So I feel my price of $550 is fair as its still a saving of over $300. I actually paid more than this when I bought the dump/front as the Aus $ had just devalued and paid just over $1000.

To anyone interested in the Moonface dump I will sell it for $550 Delivered, $350 cheaper than Nengun, for this weekend only.

I have had a few PM's enquiring about the Ohlins rear shocks. I forgot to clarify these are both height and damper adjustable

Just to update the following is now confirmed sold

550cc Injectors

Moonface MF-R Dump/Front Pipe

Cusco Front Camber Arms

Cusco Rear Camber Arms

Sard Torque Control Valve

DBA 4000 Rear Slotted Rotors

Nardi Steering Wheel

Apexi Carbon Fibre Strut Brace

-----------------------------------------------------------

The following is still for sale

PFC Datalogit

Tomei HICAS Lockkit

Attain HICAS Lockbar

Full R33 GTR Interior Front and Rear Seats + GTR Front and Rear Doorcards/Trims

Polished Intake Pipe Kit

R33 UAS Series 2 Carbon Fibre Vented Bonnet

Recaro

R34 GT-T Slotted Rotors

Greenstuff Front Brake Pads

R33 Genuine Ganador Side Mirrors

Cusco Pillow Ball Upper Mounts

R34 GT-T Stock Mags with new tyres

GFB Stealth FX BOV Kit

R33 Series 2 Front Bar + Nismo Lip

Apexi Pen Turbo Timer

R33 GTS-T Ohlins Rear Shocks both height and damper adjustable

Brand New Bodyform 400R Rear Bar and Side Skirts

Brand New PSI Parts Du Luck Rear Bar and Side Skirts

The following is now sold pending payment

Tomei HICAS Lockkit

Cusco Pillow Ball Upper Mounts

R34 GT-T Stock Mags with new tyres

-----------------------------------------------------------

The following is still for sale

PFC Datalogit

Attain HICAS Lockbar

Full R33 GTR Interior Front and Rear Seats + GTR Front and Rear Doorcards/Trims

Polished Intake Pipe Kit

R33 UAS Series 2 Carbon Fibre Vented Bonnet

Recaro

R34 GT-T Slotted Rotors

Greenstuff Front Brake Pads

R33 Genuine Ganador Side Mirrors

GFB Stealth FX BOV Kit

R33 Series 2 Front Bar + Nismo Lip

Apexi Pen Turbo Timer

R33 GTS-T Ohlins Rear Shocks both height and damper adjustable

Brand New Bodyform 400R Rear Bar and Side Skirts

Brand New PSI Parts Du Luck Rear Bar and Side Skirts

The following is now confirmed sold

Tomei HICAS Lockkit

R34 GT-T Stock Mags with new tyres

The following is now sold pending payment

Cusco Pillow Ball Upper Mounts

-----------------------------------------------------------

The following is still for sale

PFC Datalogit

Attain HICAS Lockbar

Full R33 GTR Interior Front and Rear Seats + GTR Front and Rear Doorcards/Trims

Polished Intake Pipe Kit

R33 UAS Series 2 Carbon Fibre Vented Bonnet

Recaro

R34 GT-T Slotted Rotors

Greenstuff Front Brake Pads

R33 Genuine Ganador Side Mirrors

GFB Stealth FX BOV Kit

R33 Series 2 Front Bar + Nismo Lip

Apexi Pen Turbo Timer

R33 GTS-T Ohlins Rear Shocks both height and damper adjustable

Brand New Bodyform 400R Rear Bar and Side Skirts

Brand New PSI Parts Du Luck Rear Bar and Side Skirts

Edited by nigelswazi

Hey mate,

Attain HICAS Lockbar: Does it come with all bolts and connections for the Hicas? Just alot of people are selling these items without the full set of correct parts. If everything is there in full ill take it....

Cheers

Josh

  • 3 weeks later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...