Jump to content
SAU Community

Recommended Posts

very little use , twin td05 trust turbo kit good for over 500 rwhp . comes with turbos,trust gate and manifolds . in excellent condition $2500

RIMG0013-1.jpg

RIMG0012.jpg

RIMG0014.jpg

RIMG0015.jpg

RIMG0016.jpg

greddy intake plenum to suit rb26 brand new , polished and ready to go ( not cheap copy this was bought from greenline over a year ago and never used )

$900

RIMG0011-2.jpg

RIMG0010-1.jpg

please contact me on [email protected]

or sms/call 0433696050

ok i had a question about power output of the twins ,

im not totally sure on the exact rpm and boost outputs , as i got these turbos on a half cut i bought and ive put on a t78 kit instead.

here is a link to someone else with the same spec turbos ( but looks like not a genuine trust kit like this one )

http://forums.gtrcanada.com/showthread.php?p=432192

400 rwhp at 19psi

also i know im a new member so my trader feedback might seem uncrediable .

for peace of mind you welcome to check my ebay feedback which i have over 570 credits with 100% perfect feedback ratings

http://myworld.ebay.com.au/2ooomanytoyz

i've also got this same kinda set up not in the car yet, just wondering if anyone else has ths set up or know of one with it, just want to know the lag and the power they make at wat boost on RB26?

i've also got this same kinda set up not in the car yet, just wondering if anyone else has ths set up or know of one with it, just want to know the lag and the power they make at wat boost on RB26?

did you not read the link i provided ??

has a dyno chart readout and mods list of a similar turbo setup

Dyno update

-My innovate wideband needs to be calibrated....when I recorded 11.5 afr it was 10.5

-I had the gain too high on the boost controller and it crapped itself at 4400

-I tuned the power fc with my datalogit so it looks like I have some more work to do.

-the 4" Arc Ti exhaust sounds like an animal!

-Z32 mafs and 1000 cc Rc's in my back stock that have to go in

VEHICLE: 1990 GTR

ENGINE: RBDETT 2.6 fresh from nissan

MILEAGE: 30,000 km

OIL/WATER PUMP: stcok

OILING SYSTEM: stock

INJECTORS: stock

FUEL SYSTEM: Apexi pump rewired

TURBO SETUP: TD-05-16G in stock housings

MAP or MAF's: stock mafs

INTAKE SETUP: stock manifold, hard pipe kit with "Y" pipe

INTERCOOLER: stock

VALVETRAIN: stock

HEAD WORK: stock

EXHAUST: trust down pipe, 3" decat, 4" Arc Ti

BOOST LEVEL: 18 psi with Blitz SBC-id-3

ECU SETUP: Power Fc

CLUTCH: Nismo single plate

DRIVETRAIN F/R: stock

SPECIAL NOTES: 53mm Koyo rad with flexilite fan

DYNO:

HP: 400.2

TQ: 336.8 ft.lbs

looks like it pulls full boost by about 4000 rpm

and oh yes the greddy inlet is sold , paid , posted

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...