Jump to content
SAU Community

Recommended Posts

Hi All,

I am looking at organising another tuning trip for Dr Drift (Sam Cornell) to Coffs Harbour (NSW North coast) after the success of last 2 tuning trips in August 2007 & 2008. At this stage I am after EOI from people who would like there Nissan ECU's remapped, PFC's tuned or Subaru and Mitsubishi ECU's retuned. No dates have been set yet.

These are the costs for the Nissan remaps Dr Drift (Sam Cornell) can do (+ others just talk to him)

$330 + Dyno time - CA18, R32 RB20, RB26, R31/VL RB30, Z32 VG30

$450 + Dyno time - S13 SR20, N14 SR

$550 + Dyno time - S14/15 SR20, R34 RB25

$1000 + Dyno time - R33 RB25, R33GTR RB26 (speak with Sam)

The Subaru and Mitsubishi Tuning is basically for 98 models on with costs about $600 -$800, for more specific info on these speak with Sam

The dyno time will be charged at $180 an hour and will be done on an AWD Mainline Dyno, there for GTR's, GTIR's, Evo's and Subarus wont be an issue.

So if you are interested in getting either a Nissan ECU remap, Subaru or Mitsubishi retune or PFC tune, contact either myself Brett Saunders via PM or [email protected] or contact Sam Cornell (Dr Drift) on [email protected] or 0425818755

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...