Jump to content
SAU Community

Recommended Posts

Hey guys Im having some troubles trying to get my car running,

I have an rb25/30 in my series 1 r33 gtst. The ecu has not yet been tuned but I dont see why it should still not start and run roughly. ECU is a microtech LT12s. You might mock it but thats what the majority of tuners are good at around here.

It is only sparking on Cylinder number 2 and only putting fuel into number 6. What the hell could be causing this? I have checked all the connections many many many times to make sure everything is all plugged in. I have changed the plugs to some new ones at the right gap and there is still only spark on cylinder number 2. I have also fiddled with the CAS and still nothing. I have also tried fitting a working CAS and it is still doing the same thing.

What could be doing this? Could it be that the igniter is broken? Would the igniter being stuffed affect the fuel injection or could it be a coincedence and something else is f**ked at the same time. I am kind of hoping that the ECU isnt f**ked but I dont have a standard one to test on the car just for initial start up.

All suggestions welcome :happy: Thanks guys

Edited by Lukas 33
Link to comment
https://www.sau.com.au/forums/topic/288189-car-wont-start/
Share on other sites

I would suggest that the LT12 isn't configured correctly to run a RB engine in sequential spark/injection mode. Get it to the tuner to have it set up correctly.

BTW -spark plugs themselves have no effect on spark delivery or timing.

Link to comment
https://www.sau.com.au/forums/topic/288189-car-wont-start/#findComment-4829670
Share on other sites

yes i agree it should kick over and run terrible.

To me it seems that you may have to have your ecu tuned, depending on the item, or worst case your ecu maybe dodgy? is it 2nd hand or brand new?

The ECU is second hand. However it was from an rb25 and the car WAS running for a couple of laps around the block before this kind of shit happened when trying to start

Link to comment
https://www.sau.com.au/forums/topic/288189-car-wont-start/#findComment-4830021
Share on other sites

tuning the ecu wont make much difference if the injectors and coils are not firing. have you checked that you are getting the signals to fire the coils/injectors?

Nah I havent. Where exactly should I look for signal to the injectors? Or just check power is getting to the injector plugs? I doubt 5 of 6 injectors are broken but I will check if there is any signal being sent to them. Should I just check for a signal between the ignitor and the coils? Do you suspect broken injectors or coils? Cheers

Link to comment
https://www.sau.com.au/forums/topic/288189-car-wont-start/#findComment-4830032
Share on other sites

The injectors should have permanent power when IGN = ON. The ECU switches to earth to open the injector.

Pull the CAS, turn IGN -> ON, slowly rotate CAS shaft and listen for injector and coil activity.

Check that you haven't bent the pins inside the connector plugs when you connected everything up.

Link to comment
https://www.sau.com.au/forums/topic/288189-car-wont-start/#findComment-4830770
Share on other sites

The injectors should have permanent power when IGN = ON. The ECU switches to earth to open the injector.

Pull the CAS, turn IGN -> ON, slowly rotate CAS shaft and listen for injector and coil activity.

Check that you haven't bent the pins inside the connector plugs when you connected everything up.

Yeh I have pulled the CAS off and have rotated the shaft around. It is still only activating inj 6 and coil 2. No pins are bent

Link to comment
https://www.sau.com.au/forums/topic/288189-car-wont-start/#findComment-4830837
Share on other sites

It is sparking to all cylinders now. But why no fuel to anything but number 6? Could it be that the ignitor may stilll be faulty? Is it worth buying another ignitor and stock ecu to see if this could be my problem?

If my injectors plugs or ignitor had a crap connection would that put the car into a sort of limp mode?

Main question. should I try getting a new ignitor and ecu and trying that out?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/288189-car-wont-start/#findComment-4833801
Share on other sites

The ECU is second hand. However it was from an rb25 and the car WAS running for a couple of laps around the block before this kind of shit happened when trying to start
It is sparking to all cylinders now. But why no fuel to anything but number 6? Could it be that the ignitor may stilll be faulty? Is it worth buying another ignitor and stock ecu to see if this could be my problem?

If my injectors plugs or ignitor had a crap connection would that put the car into a sort of limp mode?

Main question. should I try getting a new ignitor and ecu and trying that out?

Cheers

So it was working fine, then it stopped working, now the coils are working but you haven't found and fixed any faults? Sounds like the ECU is dodgey or the loom/connectors between it and the coils/injectors.

The ignitor should have no effect on your injectors (if that is what you were asking).

Pull the CAS out and plug in a stock ECU and see if turning the CAS fires all the coils/injectors. If so then it would point to your ECU being faulty. If not then check the loom out.

Link to comment
https://www.sau.com.au/forums/topic/288189-car-wont-start/#findComment-4834180
Share on other sites

So it was working fine, then it stopped working, now the coils are working but you haven't found and fixed any faults? Sounds like the ECU is dodgey or the loom/connectors between it and the coils/injectors.

The ignitor should have no effect on your injectors (if that is what you were asking).

Pull the CAS out and plug in a stock ECU and see if turning the CAS fires all the coils/injectors. If so then it would point to your ECU being faulty. If not then check the loom out.

Ok I will get it checked out as soon as I can and get a stock ecu on tuesday or so. Im 350kms from the car so gotta try and get a mate to do it at the moment. I would much rather the loom be faulty than the ecu >_< Should i put the ignition to ON and just unplug one injector plug at a time and put the test light on each plug to see if they all have power? Will try and get an electrician friends out there to have a look

Link to comment
https://www.sau.com.au/forums/topic/288189-car-wont-start/#findComment-4834928
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...