Jump to content
SAU Community

Recommended Posts

Are you upgrading manifolds or something?

Not really worth it as the turbine housing is still a problem no matter how good the manifolds are, which makes them a waste of cash for anything under 450rwkw :D

I am using the standard manifolds but just going to match port the turbo flange on the manifolds.

I have a spare set and they look similar but just wanted to make sure if it does / does not matter, whichg oes on the front or rear of the engine.

I am using the standard manifolds but just going to match port the turbo flange on the manifolds.

I have a spare set and they look similar but just wanted to make sure if it does / does not matter, whichg oes on the front or rear of the engine.

Both come up the same part number on FAST if thats any help m8.

n1 are better yes but i believe that there is a slight difference between front and rear as the rear turbo sits further out from the motor

No. They are both the same.

.....

Congratulations on deciding to port the standard manifolds! They are much better than any other stainless steel poorly made crap! Youve made the right choice.

thanks guys.

So they are the same, thats good to know.

Yeah the last thing I want is to have to remove manifolds to fix a crack etc. And since most people talk highly of thw standard manifolds with the ported flange, it seems like a logical choice.!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...