Jump to content
SAU Community

17x8 +35 Rims On A '32 Gts-t?

PUDZ 32R

By PUDZ 32R,
in Cosmetic, Styling & Respray

 Share

Recommended Posts

PUDZ 32R Enthusiast

PUDZ 32R

Posted
Posted

gday guys, as above question. will they fit or do i need to get different offset. i tried offset calcs but cant make sense of the ones i am looking at. will try to attach a pic of the rims i am looking at.

also what is the PCD for a skyline R32 GTS-T? 5x100 or 5x 114.3?

post-58305-1254109431_thumb.jpg

Link to comment
Share on other sites
PUDZ 32R Enthusiast

PUDZ 32R

Posted
  • Author
Posted (edited)

when i get them will let everyone know if i have made an expensive mistake or that they DO infact fit over my calipers.....

heres hoping and many crossed fingers haha

also will weigh them etc so they can be added to the wheel weights guide.. maybe that will help some people.

Edited by PUDZ 32R
Link to comment
Share on other sites
PUDZ 32R Enthusiast

PUDZ 32R

Posted
  • Author
Posted

ok.. the bad news.. turns out infact they do not fit over my front calipers by about 1.5mm. i think i will haveto hold off until i get bigger brakes then they will fit.. or make 2mm spacers..

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • funkymonkey
      R32 Nostalgia

      By funkymonkey · Posted

      100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • r32-25t
      Bolt dress up kit

      By r32-25t · Posted

      They sell them in Malaysia for about $4
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...