Jump to content
SAU Community

Recommended Posts

Since you've done so much damage, why don't you just get another neo from a wrecker and go again. It only died because your oil was on the track. I think a neo with a good sump will last for ages. 90% of rb's die from oil starvation of some description, or a bad tune. Don't see too many die from being pushed too far

i would but i cant find any around for a reasonable price... im not paying 2.5-3K for just a motor like some wreckers want,

mercuary motorsport proved you can push 700 hp from a stock neo and then subject it to drag racing for a while with their VC commo they built for a customer.. i dare say the rods and pistions are strong things!

i shall start a slow build of another block i have on the side... will get it ready for next year

Yeah the things that kill RBs are almost always oil related, fix that and you'll have a very reliable motor, nissan knew how to build them better than a lot of builders out there. I'd trust some guy that built 20 motor a day for years over some muppet that takes your $10k of parts and gets the clearances wrong.

i would have found a way to make it work lol.

well good news anyway i got my new crank tested, fitted with crank collar, ACL race mains and big end bearings supplied, and maching of crank for 400... not a bad price! just need to re-assy. check tolerances and then put it back together

i would have found a way to make it work lol.

well good news anyway i got my new crank tested, fitted with crank collar, ACL race mains and big end bearings supplied, and maching of crank for 400... not a bad price! just need to re-assy. check tolerances and then put it back together

Who is doing the engine work for you champ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...