Jump to content
SAU Community

Recommended Posts

Hey everyone got an eoi on my car...

grey r32 gtst s2 last of the r32 shape

2 door rb20det manual 5 speed

""I got regency defected and have passed at great expence so the car is 100% legal and untouchable by police""

exterior ,

gtr rear wing ,gtr side skirts ,black bonnet with white nismo decal

r34 gtt rims 17 inch 90%tread

was lowered now on stock springs lowered ones included in sale

Interior

standard cluster , nardi torino legal steering wheel , decent deck with controller , 15 inch sub doesnt fit in back so on rear seats atm lol , goes off hard... all gauges ect removed comes with 5 inch monster tacho and boost gauge(not installed) also comes with turbo timer (not installed)

Engine

rb20det around 140,000 engine has been rebuilt at some stage probably about 60,000 ago ,,

3inch X-Force exhaust highflow cat 5 inch tip , brass 3.5 inch dump pipe off turbo back to cat ,, has a mean rb roar!!

Rb25 turbo with unknown brand highflow i think it is stealth or ccg ,turbo is rated up to 20psi

Gizmo ebc havent tuned it in properly ?? but my bleader was runnign 14.5 psi bleader setup comes with car

big arse pod with z32 afm setup all legally mounted on bracket

rb20det remapped computer by jeff from speedlab

550cc injectors and bosch 044 fuel pump all tuned,, really safe air fuel mixtures

Huge front mount intercooler with alloy piping look wild

Adjustable cam gears

extreem heavy duty clutch , not too hard rated at about 250rwkw

recently serviced new platinums and new perf oil

car has been dynod made 205.7 rwkw on 14.5 psi but spikes up to 15 because of bleeder .. with cat removed splitfires and new tune will make 215 on same boost ,, is really quick as it is pulls you back hard in your seat on boost

Suspension

due to gettign regency this is what cost me an arm and a leg

new shockers and stock sprigns all round , new upper control arms , new steerign rack front , new bushes front , new hikas entire rear esembly , new bushes rear ,, this cost me about 3 grand mainly labour

Drives like a new car sweet cruiser

Car may also come with brand new t04e and 38mm tial ext gate , set of 4 slammed shocker/spring assemblies and set of 2 medium lowering front shocker/spring assembly...

Price.. chasing around 13k or swaps ,, pretty keen on wrx or rx7 or gtr + cash your way or supra $ your way or anythign turbo not interested in v8 ,,, pm me what you got no lowballers

post-46933-1255157388_thumb.jpg

post-46933-1255157434_thumb.jpg

post-46933-1255157471_thumb.jpg

post-46933-1255157508_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/291377-eoi-sa-r32-gts-t-very-quick-car/
Share on other sites

so regency passed the car with 550cc injectors, z32 afm, remapped ecu and a bleeder valve????

100% legal and un touchable i think not.

cops will defect you straight away for just the bleeder valve never mind anything else.

obviously i took off the bleeder when i went to regency , and what are you runnign on your mate stock boost? the z32 and injectors passed fine so did the 25 turbo and i ve got the papers to proove it

i didnt advertise mine as untouchable.

dude that bought it found that out.

but dude your car does seem worth it so dont take to much offence.

dont know how the injectors passed as the ones i took through for compliance they deffinatly looked at.

was chatted on how if they are change so is the ecu and that wont pass as emissions have changed.

Yeah mate fair enough,, the injectors are stealth look stock and the computer is identicle to the factory unit ,, at regency i was not emission tested but seeing as im still running a cat and muffler system i couldnt see it being that much of an issue???

!!!Update ... has an EBC installed and a Short shifter and brand new aftermarket clear front indicators.... Also looking for a swap for a r33 gtst if someones got a worked one..... or a commodore ute ss ect,,,,,

  • 3 weeks later...

Update!!!! Changed a few things ,, changed the boos controller to a turbosmart 1 stage solenoid type boost controller , boost is the smoothest it has ver been no boost spike whatsoever , changed front indicators brand new clear now they look good as compared to gay yellow ones , Super spark coil packs big difference in power boost pulls on hard past 7kprm as fuel and spark is constant ,, been runnign 98 octane with pricey octane booster and turned boost up to just over 15 around 15.5 and jumps to 16 max , now with new legally mounted boost gauge ,, under stering wheel to the left.. have raced a few guys , raced a 255kw vx senator signature on lag i was pullign away from him and on boost was like nos 2 - 3 cars ,, this car is rediculously quick , has around 220 rwkw now!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
×
×
  • Create New...