Jump to content
SAU Community

Help R32 Misfire I Carnt Fix It Help!

TwinTurboSupra+R32 Gtst
 Share

Recommended Posts

TwinTurboSupra+R32 Gtst Proficient

TwinTurboSupra+R32 Gtst

Posted
Posted

hey guys my r32 gts4 is pissin me off i can not find out why it is missfiring after its warm on idle any help on this would be great my mech cannot figur it out and im over it its got a hiflowed garret t3 off a rb30 on it . 3 inch exhaust turbo back .fmic, bosch 040 fuel pump, nad also on full boost it is cutting out as im going full throttle is it fuel cut? its like i hit a brick wall i did not think skylines had fuel cut im running 15psi cause i have such a big turbo boost does not come on till 4g also i blocked off my pvc vavle cause it was stuffed and i have got to breathers coming off the top but any help on this would be great sorry for the long msg but im stuck cheers...

Benzino33 Experienced

Benzino33

Posted
Posted
hey guys my r32 gts4 is pissin me off i can not find out why it is missfiring after its warm on idle any help on this would be great my mech cannot figur it out and im over it its got a hiflowed garret t3 off a rb30 on it . 3 inch exhaust turbo back .fmic, bosch 040 fuel pump, nad also on full boost it is cutting out as im going full throttle is it fuel cut? its like i hit a brick wall i did not think skylines had fuel cut im running 15psi cause i have such a big turbo boost does not come on till 4g also i blocked off my pvc vavle cause it was stuffed and i have got to breathers coming off the top but any help on this would be great sorry for the long msg but im stuck cheers...

have u tried using the search function? i think this topic has been covered a few times.

But to answer your question, i probz think ur ecu is hitting R&R. are u running a stock ecu?

Turn the boost down to about 10psi and see how it goes, also check your coil packs and spark plugs

TwinTurboSupra+R32 Gtst Proficient

TwinTurboSupra+R32 Gtst

Posted
  • Author
Posted

yeah i have the coil packs are fine there all fix up and i have gapped my plugs 0.8 ill try turning down the boost i am running stock ecu is there anything else i should try? thanks guys for all your help.

Benzino33 Experienced

Benzino33

Posted
Posted
yeah i have the coil packs are fine there all fix up and i have gapped my plugs 0.8 ill try turning down the boost i am running stock ecu is there anything else i should try? thanks guys for all your help.

your stock ecu shouldnt be run over 12psi..it will go into boost cut mode

TwinTurboSupra+R32 Gtst Proficient

TwinTurboSupra+R32 Gtst

Posted
  • Author
Posted (edited)

ok whats the best option is there a copgy back ecu chip i can get to override it or im going to dr drift in mel soon to get it tuned and sorted thanks for your help

Edited by TwinTurboSupra+R32 Gtst
Benzino33 Experienced

Benzino33

Posted
Posted
ok whats the best option is there a copgy back ecu chip i can get to override it or im going to dr drift in mel soon to get it tuned and sorted thanks for your help

Yeah you would need a remap to run higher boost, or get a pfc or somethin.

a dr drift tune should be good tho. or u can buy an already tuned ecu for a lot cheaper,,but i dont trust them too much

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...