Jump to content
SAU Community

Rb25 Custom Inlet Manifold, 4x Mt/bf Drag Radials On Rims, Blitz Dsbc Sr Boost Contoller, R32 Tomei Headlight Intake


Recommended Posts

Selling the remaining parts from my project 32

Custom inlet manifold for RB25, modified std runners - old Subzero type one, with 70mm? 5ltr holden throttle body

Includes alloy fuel rail with 75lb ~800cc Holley injectors

Sard pressure reg

Injectors, reg and fuel rail were new, mainfold SH but polished up

$1000

Blitz Duel SBC spec R boost contoller, fitted but as new, includes all wiring etc, $400

Tomei R32 headlight replacent intake, painted black, as new, $250

2 x MT Drag radials, 255/50R16, 80% tread remaining mounted on polished 5 spoke wheels (std toyota of some sort) 16x7.5 + 50?, perfect offset for my 32 with +1 camber for the drags, with wheel nuts to suit wheels, $400

2 x BF goodrich draf radials, 255/50R16, 80% tread remaining mounted on polished 5 spoke wheels (std toyota of some sort) 16x7.5 + 50?, perfect offset for my 32 with +1 camber for the drags, with wheel nuts to suit wheels, $400

Parts in Adelaide but can arrange shipping of all items, emails [email protected]

post-429-1255328890_thumb.jpg

post-429-1255329383_thumb.jpg

Will get some pics of headlight and other stuff later today hopefully, cheers

pics of head light intake? very keen

Will find out for you, can you please pm me address or at least post code, thanks

keen on the rims and tyres mate how much would it cost to freight to gold coast?

cheers

Pics of intake and the 2 MT drag radials, the wheels and the condition of the BF ones are the same, just need to dig them out to get some pics

post-429-1255553229_thumb.jpg

post-429-1255553666_thumb.jpg

post-429-1255553844_thumb.jpg

Blitz Duel SBC spec R boost contoller, fitted but as new, includes all wiring etc, $400

To clarify, Spec R? Wouldnt happen to be an Spec R ID?

600x250-2008013100006-3.jpg

461x228-1255503827858703_dsbc_r.jpeg

G'day Mate, would you mind doing me a favour... when the tyres are lying on the ground, how many mm's to the mounting hub face (lying facedown and backdown).

I know you've given the offsets and tyre width etc, but it's going to be really tight on my car, so I'd like some exact figures if possible :whistling:

Thanks again,

Tim

Roy, no its the one in the lower pic, the std Spec R i think

To clarify, Spec R? Wouldnt happen to be an Spec R ID?

600x250-2008013100006-3.jpg

461x228-1255503827858703_dsbc_r.jpeg

G'day Mate, would you mind doing me a favour... when the tyres are lying on the ground, how many mm's to the mounting hub face (lying facedown and backdown).

I know you've given the offsets and tyre width etc, but it's going to be really tight on my car, so I'd like some exact figures if possible ;)

Thanks again,

Tim

With wheel/tyre flat on ground,

overall height of tyre at the biggest boldge = 260 mm

ground to wheel mount flat = 180mm

this would make sence, as the wheels are marked +50, half distance is 130 + 50 = 130

They fitted nice on my 32 gtst with camber set as it was, also had adjustable rear camber arms. Not sure if at one point I had to use 5mm spacers to get them to clear with different camber/control arms. But the tyres are worth it by themself so the wheels are just a bonus. Hope this helps

Blitz Duel SBC spec R boost contoller

Would this be the right one for an R34GTT or would it be the spec S silly question maybe but I just don't know. :down:

The boost controller will work with any turbo, the spec S uses a different boost control solenoid, the spec R one has a better solenoid to contol the boost, hope this helps, cheers

Blitz Duel SBC spec R boost contoller

Would this be the right one for an R34GTT or would it be the spec S silly question maybe but I just don't know. :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...