Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

What size rear has the turbo got Abe?

I think the Garrett 3076R(3037S) is a 0.82

little bit of a lean spot there at 160kph....just monitor your knock count

Are you talking about the 262kw graph or the 149kw graph?

If the 262kw graph, if i am not happy with the tune i can take it back and get it touched up for free :), he didn't really have much to go with as it was a whole new tune, so he got it to where he was happy with it and gave it back to me. If there are some niggle bits i am not happy with, he will sort it out, see how we go on the way to Loxton. But i will rarely be driving at 160kph, if at all.

u can see the lean spot in the first 149kw graph that you posted. there is a big drop in the afr line.

ur new tune looks good :)

Ah...well the 149kw graph is stock...stock everything other then a podfilter.

just bought an RB20 + gearbox + FMIC + ecu, afm, loom +3'' zorst for 1100.

bargain? yes.

entirely happy? no its missing .5 of a liter in capacity but oh well, its a budget build.

specially when its gettin fitted and wired by a effing champ in swaps for the RB30 :)

cant wait.

pretty keen to build it up in almost every area, inherited some pretty average suspension in the car so probably looking at coilovers as my first upgrade. gunna go for the BC br range i recon, cant seem to find any negative feedback on them and they are sweet price.

pretty keen to build it up in almost every area, inherited some pretty average suspension in the car so probably looking at coilovers as my first upgrade. gunna go for the BC br range i recon, cant seem to find any negative feedback on them and they are sweet price.

buy decent quality straight off the bat. please. save for an extra week or 2 and buy cusco's or something.

I think the Garrett 3076R(3037S) is a 0.82

.82 rear, thats why its a bit laggy, but u got more topend out of it

since u cant check ya knock level reading just keep an eye on ya engine warning light, if it starts to come on regulary after a boosting hard step off and getnya tuner to check everything again (timing)

just bought an RB20 + gearbox + FMIC + ecu, afm, loom +3'' zorst for 1100.

bargain? yes.

entirely happy? no its missing .5 of a liter in capacity but oh well, its a budget build.

specially when its gettin fitted and wired by a effing champ in swaps for the RB30 :)

cant wait.

nice deal Graig

and who is this CHAMP that is wiring it up for u??

buy decent quality straight off the bat. please. save for an extra week or 2 and buy cusco's or something.

fair enough, might have a look into it a bit further. im normally pretty keen to do everything the right way. to me these coils looked like a fair deal.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...