Jump to content
SAU Community

Recommended Posts

hey guys just need help with one thing (sorry for being a newb) but i'm trying to find a hose to connect to my boost controller, it's that hose that's meant to come off the stock intercooler. thing is i have an fmic installed and there's no hose that comes off from it, any ideas which hose i can tpiece it off to connect to the boost controller?

*pic of which hose would be a great deal of help.

-thanks

you can tee it into the hose to the bov (hook it in using a T piece and a second piece of hose and not just stick the controller in the middle of the hose) but that isn't ideal. the best way is to get a nipple installed into the cooler piping, preferably on the pipe from the turbo to the cooler.

did you just install the cooler, or was it on there when you got the car? if it was already on there, find where the wastegate is currently getting it's pressure reading from (follow the hose from the wastegate back to where it joins either the cooler piping or the plenum) and put your controller in there

you can tee it into the hose to the bov (hook it in using a T piece and a second piece of hose and not just stick the controller in the middle of the hose) but that isn't ideal. the best way is to get a nipple installed into the cooler piping, preferably on the pipe from the turbo to the cooler.

did you just install the cooler, or was it on there when you got the car? if it was already on there, find where the wastegate is currently getting it's pressure reading from (follow the hose from the wastegate back to where it joins either the cooler piping or the plenum) and put your controller in there

yeah the cooler was already there when i got my car, that's what i tried before (t-piecing the hose for the bov) the problem was it was overboosting so i was thinking that it was the wrong connection, what i've read so far is that the best connection is the compressor housing, can't really see with the heat shield being there, i've also read somewhere that you don't have to take the heat shield off to connect it, can you confirm that for me?

-thanks.

the r33 has no nipple on the turbo as far as i know (i have never seen one and i have pulled a stock turbo off) but i have seen people put them into the stock turbo (also some other turbos come with them fitted from factory). however i would just have one fitted to the cooler pipe that runs from the turbo to the cooler. when i first put on my front mount i was using the hose from the plenum to the bov and had spiking issues. then i put a nipple in the "hot pipe" as i refer to it and never had any issues with boost spiking again (well at least any that weren't caused by a faulty controller)

the r33 has no nipple on the turbo as far as i know (i have never seen one and i have pulled a stock turbo off) but i have seen people put them into the stock turbo (also some other turbos come with them fitted from factory). however i would just have one fitted to the cooler pipe that runs from the turbo to the cooler. when i first put on my front mount i was using the hose from the plenum to the bov and had spiking issues. then i put a nipple in the "hot pipe" as i refer to it and never had any issues with boost spiking again (well at least any that weren't caused by a faulty controller)

sweet thanks for that, will try it this weekend. A friend suggested that, was just seeing if there were any other alternatives but from the sound of your setup should be sweet.

-thanks

  • 1 month later...

I drilled a hole in the side of the fmic piping, and then tapped a hole for the nipple to screw into. Works fine for me.

@mad082, you mentioned that its preferable to screw it into the pipe between the turbo and the intercooler. I did it in the pipe from the fmic to the engine. What exactly are the downsides to how i did it? I only picked where i did because i figured it would be a more accurate gauge of the pressure going into the engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...