Jump to content
SAU Community

Recommended Posts

Hi all,

Can someone please confirm if the side skirts and the rear pod bits on the car in the picture are a nismo body kit?

If so, does anyone know how much they are worth new? And how much they have roughly been selling for when used / second hand?

Any info is much appreciated.

Cheers!

post-54322-1255524277_thumb.jpgpost-54322-1255524322_thumb.jpg

Edited by KR4-GTR
Link to comment
https://www.sau.com.au/forums/topic/292035-r34-gtr-is-this-a-nismo-body-kit/
Share on other sites

Hey Chris,

Genuine Nismo gear is very expensive.

Side Skirts $1270 via air or $1100 via sea, Price do not include local GST or import duties.

Rear pods $860 via air or $840 via sea, Price do not include local GST or import duties.

Cheers,

Johno

Hey mate, they look like the Z-tune side skirts and rear pods.

I just bought a set of the skirts and pods from Bodyform Aero in NSW for $580 ($330 sides/$250 rear)

From all accounts I'd heard, Bodyform were the way to go so I took the plunge and gave them a try.

Peter and Allan there were very helpful and quick to respond to emails.

I've written more on here about my experience with them.

http://www.skylinesaustralia.com/forums/in...t&p=4850400

My car is currently in getting them put on, I'll be picking it up after work today so I can provide pics of what it looks like but I'm pretty confident it'll look good.

When I dropped the parts in to DT Panels, their reaction was "Whoa are these genuine? Are you sure?? They look very well made!" haha that brough a smile to my face.

They're either genuine Nismo or Nismo lookalike. Most replicas seem to be made with fibreglass, the real ones are plastic. The side skirts make the car bloody low, I've already had a few decent hits on speed humps, and when I saw the price on replacing them, I decided to get them repaired instead lol

Uh oh haha, I knew it would make it lower but was hoping it wouldn't be too much lower!

Have you lowered your car too Kristian? I'm hoping I can survive my driveway when I get my car back tonight.. the front lip gets a good bashing already at home and I had to take it off!

Yep agree, there is no way mine is driving over a coke can either, unless the can is on its side maybe :whistling:

if it can go over a coke can on its side... its still to high... flat coke can FTW!

Mine are F/G from JSAI. They were as I recall, about $700 for both sideskirts and rear pods.

I had my front splitter body-colour-coded at the same time (but that's on a car which is already black).

Bodyform Aero makes/fits the same. E: [email protected] P: (02)87835446

I was originally going to say that, lol

By the way, Animal Chin is at my place

hahaha.. "i have a friend, his name is animal, dont worry bout his name, he's not a cannibal, he's always happy, he's got a grin... have you seen him..

he's Animal ch-ch-ch-chin!"

ill be there sunday so we'll find him... is johnny rad there too?? dont want to miss his gig... you guys are gelling.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...