Jump to content
SAU Community

Need A Good Suspension For A Daily Ride R34gtt

skyliner34pc
 Share

Recommended Posts

skyliner34pc Enthusiast

skyliner34pc

Posted
Posted

hi all

need help? have read a lot on this topic and its not making sense to me. :dry: kind of new to this. i need a good suspension for my r34gtt. have a budget of $2500. teins or greddy's???? its my daily ride, it wont be for any tack racing or anything like that. would also like to drop the height on the car to(legal hieght not to low). have purchased whiteline adjustable swaybars, so these will be going on as well. thanks in advance ;)

_Ryan_ Grand Master

_Ryan_

Posted
Posted

Heading the right way with swaybars, Depending how stiff you would like it, Off the shelf bilsteins with springs from the whiteline catalog, or for a bit more Eibach springs and Bilsteins valved to suit.

Either setup will feel far superior to Teins, and should last a lot longer. I have bilsteins in my stagea, had them in my R31, have Tein mono flex in my 32, had koni's in my 1600.

With your budget I would be looking at the Bilstein/Eibach setup.

skyliner34pc Enthusiast

skyliner34pc

Posted
  • Author
Posted

just saw this group buy from SydneyKid....is this still available or over. i see a lot of problems him supplying this. could someone guide me to a place that could do these at this price or simler. i would be interested in the whole package if it is available. if possible supply and fit....pm me if their is someone here on sau or know someone that could do this. thanks. :(

_Ryan_ Grand Master

_Ryan_

Posted
Posted
just saw this group buy from SydneyKid....is this still available or over. i see a lot of problems him supplying this. could someone guide me to a place that could do these at this price or simler. i would be interested in the whole package if it is available. if possible supply and fit....pm me if their is someone here on sau or know someone that could do this. thanks. :(

put your location in your profile and we will tell you where to go

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      RB25DE NEO with Haltech ECU

      By Kinkstaah · Posted

      @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • GTSBoy
      RB25DE NEO with Haltech ECU

      By GTSBoy · Posted

      I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...