Jump to content
SAU Community

Wheel Knocking (metalic Noise) R33

TwoCents

By TwoCents,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

TwoCents Proficient

TwoCents

Posted
Posted

Ok i found a DIY for this else ware on wiki awnsers and thought id bring it here but with pics and a video :devil:

Here is the original place i found the info Clicky

The problem is/was a knocking noise that happens 3 times when turning the wheel to the left or right, then the noise happens again as you turn back.

It isnt a hard fix or it isnt very technical, only tools you will need is a Screw driver not too sure on what size (grabed a random one that was lying around) and a T50 torx tamperproof bit (bought mine at repco $20 for the whole set, dont need the whole set for this tho)

The weight that causes the problem is ment to be to counter balance road vibrations ( i dont really see the difference)

Video of the problem

If you stuff this up in any way its your own fault.

How To Fix It

1. Disconnect battery

2. Take out the Airbag Fuse

Ive already taken it out in this photo, its a 10A red one.

3. Remove the cover just behind the steering wheel, has 5 screws. Pull the steering wheel adjuster down so you have more freedom.

4. Disconnect airbag wire, big brown one covered in foam (i removed most the the cables just to make sure)

5. Pop off 2 plastic covers on the side of the steering wheel and you will find the bolts (one on each side).

Undo them using the T50 bit, quite hard to remove (i even bent the inside bit of one of the bolts)

6. Once you have taken the two bolts off the middle part of the steering wheel will be loose and can be taken out. Their is 1 cable that will still be connected to the airbag so unplug it and take the whole thing out.

7. The problem will be there right in front of you, its the little bit of metal that's sitting in carrier.

Problem was that the little plastic bits that hold the piece of metal inplace where broken (3 out of 4) so it would just move around and make noise.

8. RIP THAT PIECE OF CRAP OUT!

9. Start to reassemble everything, put the airbag back in place and put in the T05 bolts and put the covers back on.

10. Reconnect the wires.

11. Put the cover back on behind the steering wheel, screws and all.

12. Place the airbag fuse back in.

13. Reconnect the battery

14. Start her up the noise should be a distant memory, the airbag light should come on then go off like normal.

DONE!

Link to comment
https://www.sau.com.au/forums/topic/293221-wheel-knocking-metalic-noise-r33/
Share on other sites
  • 4 months later...
  • 2 weeks later...
  • 5 years later...
Bronno! Enthusiast

Bronno!

Posted
Posted

Legend! Really easy to do!

Make sure you buy the TAMPERPROOF torx bits with the hole in the top.... Don't be like this idiot (me) and grab the first one that sais torx bit, otherwise it's back to bunnings hahaha

Thanks again.

  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...