Jump to content
SAU Community

Recommended Posts

Hey guys not really sure how to explain or ask this but here goes;

The car SOMETIMES im not sure how to make the car do it again but it will randomly every now and then some drives it wont some drives it will.. in tiptronic mode going from 2nd gear to 3rd gear when i shift it will have a massive squeak noise i believe to come from the back.. i hav argued with mates taht its back right but some say back left - either way its from the back we can agree on this -

The sound started off as a little squeak... its really high pitched and now its getting louder to the point where over my exhaust, sound system and general conversation i can hear it and it gets alot of disgusted loooks from others on the sidewalk etc when and if it does it..

The car will also do it sometimes when im in high rev's in 2nd and coming to a stop at lights as the rev's creep down it will give a sligh jolt and hey presto theres the high pitchd squeak again..

one day i was at lights and decided to stick her in neutral and give it a little rev.. and it did the high pitch squeak again..

as i said it randomly does it some days it wont do it at all some days it just wont stop... and i dont know how to make it do it.. i hope this is making some sense does anyone know what it could be its really bugging meeee!!!!

:happy::):):down::down:

Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/
Share on other sites

are you sure its not a belt slipping? i cant think of anything in the bac that might make such a noise, and sometimes its easy for noises to sound like they are coming from places they arent, one time i was sure that my ac compressor had threw its bearings, cos of a loud scraping noise (also got some disgusted looks!) but turned out to be a rear brake pad stuck on and wearing thru the pad

i recently had a car with a slipping drive belt and it would squeal in almost the exact same situations u have mentioned

i suggest you try a can of that sticky belt spray stuff just to quickly and cheaply eliminate or target the problem of a slipping belt

and if it squeals when reved while sitting still in neutral i dont see how any squealing noise can come from the rear of the car, has anyone had a listen while outside the car??

Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/#findComment-4897503
Share on other sites

nah mate no one has listened from outside the car because i dont know how to make it do it again lol :happy:

for example today i was driving with mates it did 3 massive ones in a row and kept squeaking away a few more times... stopped parked the car for a bit had some lunch and a chat and drove it again all arvo and it did it once again only so its pretty inconsistent..

and yeah u may be right its probably not from the back but it surely does seem like it.. as it gives a slight jolt and the squeak when going from 2nd to 3rd as i said.. i dunno but yeah man thanks ill check out what you said and hopefully that shed's some light

cheers

Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/#findComment-4898100
Share on other sites

nah mate no one has listened from outside the car because i dont know how to make it do it again lol :blush:

for example today i was driving with mates it did 3 massive ones in a row and kept squeaking away a few more times... stopped parked the car for a bit had some lunch and a chat and drove it again all arvo and it did it once again only so its pretty inconsistent..

and yeah u may be right its probably not from the back but it surely does seem like it.. as it gives a slight jolt and the squeak when going from 2nd to 3rd as i said.. i dunno but yeah man thanks ill check out what you said and hopefully that shed's some light

cheers

yeah man...im not to familiar with the tiptronic, mines a manual...and my other car that had the slipping belt was a manual, and would squeal often when changing gears up or down due to the changing loads and speeds of the motor versus the rest of the car

...but usually with the belts its pretty clear that its coming from the front, i just cant think of anything else it could be, does the 'jolt' pull the car foraward or let it slow backward?? cos i would attribute the 'jolt' to be the belt catching and griping and thus puling the car forward again or slipping and letting it backward

like i said i dont know anything about the tiptronic but i cant think of any parts of it that would squeal or squeak, after all, isnt it just gears controled by electrical signals from the paddel shiters?

Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/#findComment-4898540
Share on other sites

hmmm it holds it back a bit.. jerks backward...

i was in first today in high revs going downhill and it gave a slight jolt and the random squeak :D haha its got meeee stuffed aye

and yeah its definatley coming from under the rear wheels around the suspension area

Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/#findComment-4901095
Share on other sites

ok so ive put it down to when i have my climate control on (aircon or heater etc) then the squeak is very loud even if i just rev it in neutral or park also when im driving... when i have climate control off it hasnt done it lately??

Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/#findComment-4910760
Share on other sites

Have you changed your timing belt n idler tensioner pulleys before it happened? When I done mine I got a high pitch screech sound in higher revs n even when revving in neutral, but only when I had climate control on. I took it back n they just adjusted a couple of belts n problem gone. Just when you mentioned climate control it sounded similar to the issue I had.

Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/#findComment-4910990
Share on other sites

i get this thing here and there to o.o exactly what you said Nathan. higher pitch squealing sound when the revs goes up, especially above 4rpm... but i also noticed it usually only happens to me at night time? and i never use the climate control... is my thing related or.... lol

Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/#findComment-4911679
Share on other sites

well i tested the theory out tonight with mates.. and its definatley only happening when i hav the air con fan switched on.. with it off it doesnt do the squeak but when its on i can sit ther rev it up and at about 4500 - 5000 rpm it will squeak from teh front...

Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/#findComment-4912708
Share on other sites

well i tested the theory out tonight with mates.. and its definatley only happening when i hav the air con fan switched on.. with it off it doesnt do the squeak but when its on i can sit ther rev it up and at about 4500 - 5000 rpm it will squeak from teh front...

It's the belt slipping as the aircon compressor kicks in. Mine used to do it at higher revs but it can still happen at lower revs- you just may not hear it. Ask a mechanic to tighten the belt if required and it should all be sweet. Alternatively the belt may be old and need to be replaced.

Edited by R34mac
Link to comment
https://www.sau.com.au/forums/topic/293268-random-squeak/#findComment-4912875
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...