Jump to content
SAU Community

Recommended Posts

In my opinion, you won't get a nice PULL from a stock R33 until you do some basic mods, e.g. Pod air filter, Blow off valve, front mounted intercooler and possibly some new Spitfire coilcovers and NGK spark plugs - this is what I call the basic mods. After these, you will experience a good hike in power. Added with a boost controller you'll be hitting the 200 kws mark and from here you will feel the joy.

Modify your car slowly as once you've done everything you'll soon want to move on to another car.

a blow off valve, coilpacks and some and some aren't gonna give you any power, and those mods won't get you a legitamite 200rwkw from a 33 gts-t

Yer, I've taken mine for granted! driving around a honda prelude for a few months now while my engine is out and im tidying up everything and upgrading a few things, trust me once the bug bites you will be burning money, i cant wait to put my engine back in and be able to feel the boost again!

ON TOPIC : I felt the pull in my stock 33 GTST only with a hks exhaust although it was my first turbo car, you get use to it fairly quick! Alot of first turbo owners think they have lost power once they get use to it lol.

first car; 33 auto/non turbo. .. lemon of a car.. slow as a bOat.

2nd car 3 months later. r33 gts-t. when i first jumped in it. its like HOLLY SHIT I CANT HANDLE THIS POWER its too fast.

6 months down the track.. its slow. i want to mod it..

then got a v8 for a few days.. peice of sht. need a turbo.

got my skyline back :D like anything, you get used to it if u use it enough

p.S YEAH. you THINK UR CARS GONE SLOWER so u go get a service. b uts its actually you just getin use to teh car. haha

Edited by richar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...