Jump to content
SAU Community

Double Checking 'shift Solenoid B' Model Number

Timage

By Timage,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Timage Apprentice

Timage

Posted
Posted

Sorry to spam with another thread but I need a quick answer. I've done a search on the forums and found this post in the parts thread:

May be supplied but here i go shift solenoids for an s2 . There are 2 shift solenoids this is the problem . Please do yourself a favor do the self diagnosis on your car . But the part numbers for shift soleniod A & B are . A = 31940-4ax02 . B = 31940-4ax05 . Be sure which one you need A=$350 incl trade B=$415 incl trade . So ther goes my ruddy check .

Can anyone verify that these are correct? About to order one.

Cheers.

chef_stagea Grand Master

chef_stagea

Posted
Posted

dude call MV automatics here in adelaide...

that dude knows his shit... i had my s2 off the road at a few places... all scrached there heads as it was stuck in 2nd what ever u did....

mike i think??? had it like 2 days n was sweet as... shift sol b i was shagged... he re wired it actualy. maybe an option??

Timage Apprentice

Timage

Posted
  • Author
Posted
dude call MV automatics here in adelaide...

that dude knows his shit... i had my s2 off the road at a few places... all scrached there heads as it was stuck in 2nd what ever u did....

mike i think??? had it like 2 days n was sweet as... shift sol b i was shagged... he re wired it actualy. maybe an option??

Getting all 4 solenoids replaced as an effort to make sure this is the last thing I'll ever need to fix. Solenoid A and B were screwed in the end. Now deciding whether or not to take this oppurtunity to sell it while it's running fine, or hope this is the last thing to go wrong after a string of problems.

snapper Enthusiast

snapper

Posted
Posted
Getting all 4 solenoids replaced as an effort to make sure this is the last thing I'll ever need to fix. Solenoid A and B were screwed in the end. Now deciding whether or not to take this oppurtunity to sell it while it's running fine, or hope this is the last thing to go wrong after a string of problems.

Sorry to be so late on this . I posted the part numbers for these . The A solenoid is easy to replace . The B solenoid is a pain in the arse to replace . As you have to drop the hole valve body . And if you do try this be carefull springs and shit jump out . Mine slips into second under power . As for part numbers they are correct . Solenoid A = 31940-4AX02 . Solenoid B = 31940-4AX05 .

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
Getting all 4 solenoids replaced as an effort to make sure this is the last thing I'll ever need to fix. Solenoid A and B were screwed in the end. Now deciding whether or not to take this oppurtunity to sell it while it's running fine, or hope this is the last thing to go wrong after a string of problems.

Please let me know what it costs you. My car started "flaring" so i was thinking about getting it beefed up when 3rd and 4th disappeared. I started making some enquiries about getting a shift kit and otherwise replacing bits to enable it to handle 270kw and I was looking at $2500 plus with no guarantee that it would handle that power plus being thrashed on track days so i have bought an R33 GTR box and being too old and infirm to do it myself am getting it installed. I expect it will work out cheaper than doing the auto (box was $700 but will post up total incl all parts and labour when its done) but would be interested to know what yours costs.

snapper Enthusiast

snapper

Posted
Posted
Please let me know what it costs you. My car started "flaring" so i was thinking about getting it beefed up when 3rd and 4th disappeared. I started making some enquiries about getting a shift kit and otherwise replacing bits to enable it to handle 270kw and I was looking at $2500 plus with no guarantee that it would handle that power plus being thrashed on track days so i have bought an R33 GTR box and being too old and infirm to do it myself am getting it installed. I expect it will work out cheaper than doing the auto (box was $700 but will post up total incl all parts and labour when its done) but would be interested to know what yours costs.

Hi i did all the work myself but with gaskets , fluids & the solenoids all up i did not get much change out of $1000.00 . As for beefing it up i could not help you there . I run my s2 at over 14psi day in day out and i am not kind to it . My slipping prob is a gasket that came out . Not sure where it went there for my slippage prob . My advice if you do it yourself go slow and if you can prop the valve body do it . good luck with this if you want to talk about this i will pm you my mobile .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      ECU sees many times the speed than speedo does (R34 swap)

      By Kapr · Posted

      The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The Bogan
      NC MX5

      By The Bogan · Posted

      The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Duncan
      Who has a Infiniti Q60, Q50 (V37)?

      By Duncan · Posted

      Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...