Jump to content
SAU Community

Recommended Posts

Hi guys,

Going to replace my xenon bulbs with new ones and I've read that I can use either d2c's or d2r's. Is this correct, whats the difference if that is the case???

I live in the NT and its almost impossible to get defected so I was thinking about getting 8000K bulbs but my mate said they just don't produce enough light so I was going to get 6000k instead as I've already got a pair of the stock 4300s which I'll use for rego. What do you think 6000's or 8000's???

Link to comment
https://www.sau.com.au/forums/topic/294620-r34-bulbs/
Share on other sites

i'm using d2c globes. simple plug in and play. no idea what's the differences are.

they all produce the same amount of light, just different colours are produced with different k's. the higher the k's the more blue/purple colour is produced but also the less the amount of cut is able to cut through rain/fog.

im running 8000k in my headlights, they produce very good lighting driving in good weather at night. but when i use them through rain and fog, standard ones are heaps better. the standard ones dont reflect off the rain/fog and just simple cuts through it. for example, drove through Melbourne fog one night with the standard and it was like normal, still able to see everything in front of me. drove with the 8000k, no chance.

Link to comment
https://www.sau.com.au/forums/topic/294620-r34-bulbs/#findComment-4916031
Share on other sites

For my friend's R34 GT-T, I bought him a D2C kit and it fit fine.

While on the topic.. for those who already have standard xenon bulbs, if we wanted to upgrade, would the standard ballast be up for the job so I just need to purchase the bulbs separately? Or would a replacement kit (bulbs and ballast) be recommended?

I feel that the brightness of my stock xenons are pretty weak (but kelvin rating is fine with me) compared with the aftermarket kit I had in my previous car.

Edited by UnCo
Link to comment
https://www.sau.com.au/forums/topic/294620-r34-bulbs/#findComment-4916696
Share on other sites

For my friend's R34 GT-T, I bought him a D2C kit and it fit fine.

While on the topic.. for those who already have standard xenon bulbs, if we wanted to upgrade, would the standard ballast be up for the job so I just need to purchase the bulbs separately? Or would a replacement kit (bulbs and ballast) be recommended?

I feel that the brightness of my stock xenons are pretty weak (but kelvin rating is fine with me) compared with the aftermarket kit I had in my previous car.

Just make sure they are the same wattage. (From memory 36W)

I find my stock xenons are not that bright either, especially on wet nights or if there is alot of street lights. but if i go somewhere pitch black like in the country xenons are much better then the standard halogens.

The lights should be available from the Nissan dealer, if not you can source the lights from any BMW or Mercedes dealer.

Link to comment
https://www.sau.com.au/forums/topic/294620-r34-bulbs/#findComment-4917061
Share on other sites

Ah thanks I didn't even think about that!

In my previous car I had a 55W aftermarket kit. That would explain it!

I guess the only real way to improve them would be to upgrade the ballasts along with it then.

I hope it's not too hard to remove the stock ballasts.

Link to comment
https://www.sau.com.au/forums/topic/294620-r34-bulbs/#findComment-4917381
Share on other sites

the higher kelvin temperature you go the less light is outputted 4300k is the brightest light

all oem hid lights are 35w

d2c/s lights are used for projector lights housings

post-66333-1257889682.jpg

d2r lights are used in reflector housing housings ( r34 type )

post-66333-1257889851_thumb.jpg

:note the d2c metal blocking guard

Edited by cthawes
Link to comment
https://www.sau.com.au/forums/topic/294620-r34-bulbs/#findComment-4929673
Share on other sites

  • 2 weeks later...

Has anyone here upgraded their OEM xenon lights to a 55w kit rather than just changing the bulbs?

Do you need to remove the headlights to reach the stock ballasts? I haven't really had a good look at it yet.. but if the headlights need to be taken out to reach the ballasts then it'll be more annoying to do :action-smiley-069:

Link to comment
https://www.sau.com.au/forums/topic/294620-r34-bulbs/#findComment-4946556
Share on other sites

Has anyone here upgraded their OEM xenon lights to a 55w kit rather than just changing the bulbs?

Do you need to remove the headlights to reach the stock ballasts? I haven't really had a good look at it yet.. but if the headlights need to be taken out to reach the ballasts then it'll be more annoying to do :action-smiley-069:

You do not need to remove the head lights - on a stock system. The ballasts are just under the headlight assembly.

If you want to upgrade to the 55w kit I think it is best to upgrade the ballasts too as it will require higher current flow.

But before upgrading to 55w xenons you will have to consider a few things. Most 3rd party ballasts out there are inferior quality to the genuine nissan ones, any decent ones cost quite alot - philips branded ballasts. The polycarbonate lense on the r33/r34 will yellow from the inside substantially - I think something to do with radiation from the xenon light - basically it "cooks" the lense.

Link to comment
https://www.sau.com.au/forums/topic/294620-r34-bulbs/#findComment-4946592
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...