Jump to content
SAU Community

Recommended Posts

Have been looking on just jap and am planning on buying this: http://justjap.com/store/product.php?produ...=276&page=2

Dont know too much about the different brands/which ones to avoid / etc so hope fully you can help us out with that

Also Planning on getting this cat: http://justjap.com/store/product.php?produ...=275&page=1

On another note, whats the difference bewtween these two products performance wise? Is one better flowing then the other? http://justjap.com/store/product.php?produ...=339&page=1

or

http://justjap.com/store/product.php?produ...=339&page=1

Thanks for any general feed back, will be apreciated.

Link to comment
https://www.sau.com.au/forums/topic/294850-jjr-products/
Share on other sites

sup man

yeah i have the jjr 3in front dump pipe and the xforce cat i got off them too.... fitted up sweet and i have had no issues with good power increase.

how ever i have never tried other exhaust set ups so i couldnt really compare.

catch ya

Link to comment
https://www.sau.com.au/forums/topic/294850-jjr-products/#findComment-4917904
Share on other sites

used quite a bit of thier gear over the years and been very happy (cranks, intercoolers, oil coolers, hard pipes etc) the only things ive had dramas with is the radiators.

Edited by URAS
Link to comment
https://www.sau.com.au/forums/topic/294850-jjr-products/#findComment-4917913
Share on other sites

Thanks all, exactly what i wanted to hear.

@ R31Nismoid, sorry noticed straight after i posted that they are a sponsor. And yes i do search but sometimes its quicker to ask then too spend hours shuffling through random pages looking for an answer.

Link to comment
https://www.sau.com.au/forums/topic/294850-jjr-products/#findComment-4919733
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...