Jump to content
SAU Community

Recommended Posts

Hi all,

I live in the UK, driving an R33 GTS Facelift, with an RB20E engine in it.

I now know that I have the basic Skyline and tuning is poor, has anyone done any thing with a N/A GTS like mine?

Any pointers on Induction, Exhaust and those lovely 4-stud wheels.

Regards

Mark

Link to comment
https://www.sau.com.au/forums/topic/29510-r33-gts-rb20e/
Share on other sites

Hi Mark,

I had an R33 GTS (RB20E) for over 2 years. Great car, just lacked power (and the choice of aftermarket wheels was limited by the 4 studs...) As for tuning options, even here in Japan I had major hassle trying to find suitable parts. In the end I decided it was better economics (for me) to save my money towards a more tunable (or more powerful) car, but it all comes down to personal choice.

If you'd like to squeeze some extra horses out of the engine, a pod filter (Trust does one for the RB25DE which *should* fit the RB20E), exhaust (fujitsubo make one suitable, I think) and wheels (Rays CV europe in my case)...

Good luck!

Dave

Link to comment
https://www.sau.com.au/forums/topic/29510-r33-gts-rb20e/#findComment-602749
Share on other sites

air filter, headers + exhaust, some head porting, some cams + cam gears, aftermarket ECU

after all that, i dont think you would much more then a an RB25DE engine's power output, and would have stuff all drivability.

having said that, im sure a decent cat back and a pod will make the engine sound a whole lot more better and more enjoyable to drive.

wheels, the Jap brands make some very nice 4 stud wheels, but they are expensive. enkei's and vols are some that spring to mind

Link to comment
https://www.sau.com.au/forums/topic/29510-r33-gts-rb20e/#findComment-604058
Share on other sites

Dave, Nismodified,

Thanks for the Tips, will probably kep the old girl going for a few more years, as it owes me a bob or two. The filter and exhaust ideas sound a bit of fun. Will they improve initial lift off from 0-2000 rpm, as the car can shift when you wind it up, induces wheel spin at the drop of a hat, but seems flat below 3000rpm ?

Dave,

Seen your site it proves an interesting read, made feel I was not the only one to have bought an RB20E Skyline :Oops:

Regards

Mark

Link to comment
https://www.sau.com.au/forums/topic/29510-r33-gts-rb20e/#findComment-606914
Share on other sites

Mark,

Thanks for checking out my site. To be honest I do miss my old GTS, it was a rock solid car, never let me down and looked great. If I could have kept it along with my new car I would.

Regarding power/torque below 3,000RPM - you've got to be careful when choosing an aftermarket exhaust - get something too big, you'll lose a lot of back pressure and you're low end power/torque is gonna get worse, not better.

as an example, look at this power graph for a Fujitsubo Legalis R exhaust - notice bottom end power and torque are way, way lower for the aftermarket exhaust than the std one...

LegalisR_torque.jpg

Their super R shows an improvement, but you're not really gaining much below 3K RPM:

LegalisSuperR_torque.jpg

Just saying, choose an aftermarket exhaust carefully and make sure it's specifically designed for an N/A car.

Dave

Link to comment
https://www.sau.com.au/forums/topic/29510-r33-gts-rb20e/#findComment-607039
Share on other sites

Dave,

I will check out the exhaust aspect carefully as you suggest, will also look at UK distibution for the Japanese exhauts.

I see from your site you have the R34 GTV, how much extra do we pay in the UK through importers and dealers for Skylines ?

I would like to upgrade as you have, but having paid more than I feel I should, am a little wary.

Is it worth waiting for the R34 range to come into price range or get an older R32 GTR, would value your advice.

Regards

Mark

Link to comment
https://www.sau.com.au/forums/topic/29510-r33-gts-rb20e/#findComment-608343
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...