Jump to content
SAU Community

Recommended Posts

Hi all.

Could anyone check over my map please and see what you think? I have the datalogit file and in excel format as well.

I have:

Apexi Induction

FMIC

0.85 bar boost

Straight through exhaust

The car runs nice but occasionally gets quite high knock (around 32ish) so wonder if any of you pros could look over it??? Also could you make sure my settings are ok???

Feel free to use the map on your cars as well.

Really appreciate it guys.

Alex

Alex_Stage_1_actual_map.txt

PFC_setup_stage1edit.xls

Edited by d-ranged

your map had heaps of holes in the fuel map (see left picture) and was not real smooth in the load area for timing, try this i tweaked it (see right pic) :P It should use less fuel and feel way smoother to drive, i did the timing map too.

I reckon now you try adding 2 degrees to thr whole map ive posted, check for det though.

The 32 you were getting is no biggie.

It is still not perfect but is much better, I have a few killer pfc tunes for a r33 i'll chase up (on my toughbook tuner) if you want to try it as your overseas.

Alex_Stage_1_actual_map_edited.txt

post-34927-1257679069_thumb.jpg

post-34927-1257679085_thumb.jpg

Edited by URAS
  • Like 1

Wow thanks alot mate i really appreciate that. I wouldnt mind trying out the other maps you have as well if thats ok?? I use the car as a daily driver so i can give some decent feedback if needed.

Do you mean add 2 degress to the map through inj/ign correction? or somewhere else? Sorry im a serious n00b at this and still learning.

One thing i also noticed with my orginal map is that the injector duty was hitting between 92 and 100% was that because of the dodgy fueling or is that something else? I also forgot to mention i have a walbro 255lph fuel pump as well.

Thanks again mate!

Alex

Edited by d-ranged
please list your mods, i have 3 nice ones for std turboed R33's. Whats your email?

My mods are:

Straight through exhaust

FMIC

Walbro 255 Fuel Pump

Apexi Induction Kit

Boost set at 0.85bar

Standard turbo

My e-mail is alex_newman@btinternet.com.

I have been getting high injector duty (around 92%) at higher revs in 4th and 5th gear is that anything to worry about?

Thanks mate :thumbsup:

Edited by d-ranged
How did the new map i post go?

Really good mate, never felt the car as powerful as that before and was only getting between 22-30 knock, injector duty was hitting around 92% though and I have been told this is quite bad??

Edited by d-ranged

see what inj duty you get at peak power under high load on a cold night, if doesnt max them then it'll be alright. i was just touching 100% on my stock injectors on freezing mornings at only 185rwkw

Well im in the UK so its always pretty cold lol especially in November.

I took it out on Sunday night to sort the boost controller out and it was damn cold then and foggy to. The max duty we saw was 92% at 0.86 bar peak at 5-6k rpm in 4th gear.

Well im in the UK so its always pretty cold lol especially in November.

I took it out on Sunday night to sort the boost controller out and it was damn cold then and foggy to. The max duty we saw was 92% at 0.86 bar peak at 5-6k rpm in 4th gear.

its passable@ 92% just leaves minimal head room. I am emailing a map to you now to compare :happy:

  • 6 years later...

Hi there mates do you guys know the latency for r33 top feed 850cc orange denso injectors?

I am reading these topics cause i am trying to understand how to map my rb25det pfc d-jetro ecu cause where i live no one knows how to remapp an apexi. The tunners here only deal with motec haltec or AEM ecu.

If you guys can help me with this issue will be much apreciated thanks

Edited by pedro skyline

Thanks was what i saied but they saied that they Never Done an apexi and they dont want to take the risk. About the fórmula i found it but it doesnt say what latency are they rated. I even found a injector chart but no densos orange 850cc top feed

Thanks was what i saied but they saied that they Never Done an apexi and they dont want to take the risk. About the fórmula i found it but it doesnt say what latency are they rated. I even found a injector chart but no densos orange 850cc top feed

do they have the laptop software? if not go somewhere that does

I'm just going to chuck this out there because it hasn't really been mentioned - Trent, you're a top bloke for helping out with the map above. That is really awesome of you. I don't know many tuners who would help out like you did. Keep up the good work!

  • Like 2

Thanks for your help. Very much apreciated. This fórum is realy a most with very good People and happy to help. I will logo my datalogit to my pfc and aply those numbers to the fuel injectors sheet on my pfc d-jetro. Thanks i will let you know how was it after that whith the mixture. As long as doesnt knock much and doesnt run lean i will be ok

Edited by pedro skyline

Thanks mate for your help. Very much apreciated. This fórum is realy a most with very good People and happy to help. I will logo my datalogit to my pfc and aply those numbers to the fuel injectors sheet on my pfc d-jetro. Thanks i will let you know how was it after that whith the mixture. As long as doesnt knock much and doesnt run lean i will be ok

Edited by pedro skyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sane enough. Remove the roof liner, because the acid will go everywhere.
    • Thanks guys, I really appreciate the help and experienced opinions.  I have spent a lot of my life working on boats so I'm pretty good with fibreglass. I'll take everybody's advice in here;  I'll cut a little more of the 2nd layer away as it's a bit crunchy rust and also it's sitting high now. Then I'll wire brush it all a bit to get off anything loose, then I'll soak the bejesus out of it all in rust converter. I'll make sure to get a little hose piece and feed it into all the holes and gaps between the roof layers. Then I'll fibreglass up the holes.  Then I'll get a pallet of filler and mix it with 3 buckets of hardener and hope that is enough to build up the roof corner.  Does that sound sane? Is one type of filler better than others for this?
    • My goals for it atm are to get it registered, respray and some mild power gains eventually... I picked up the car from an elderly gentleman near the border of NSW and VIC, its honestly a bit rough and looks like its been driven on a farm (because there was so much dirt underneath). Last week I dropped the subframe and emptied the old fuel out + added a new fuel pump (think the old one went bad from old fuel). Now I'm onto fixing a coolant leak at the rear of the engine + adding a new radiator as the old one is corroded. After that i have a new bumper, coils (as the old were leaking) and lots more
    • Welcome buddy! Plenty on here and YouTube. What are your plans for it? Good luck with the Rwc and Rego bud!
    • Love this so much! Please post a photo when you have a bike on the trailer.  I was a little bit worried about having a tow bar on the Skyline, but having it hidden behind the number plate is genius
×
×
  • Create New...