Jump to content
SAU Community

Recommended Posts

Hi guys,

I had this here for sale a little while back, it never sold and then forgot about it :P

It's still here and deserves a new home...here's the link to the original thread, some added info in there;

http://www.skylinesaustralia.com/forums/Ge...-T-t273748.html

As above I have a turbocharger that is a little overkill for my new application and as such it is up for sale.

It is a brand new, genuine HKS T51R SPL turbo, ball bearing turbocharger with the 1.00 exhaust housing. Turbo has sat in display cabinet for a few years but is in as new condition.

I have taken the turbo to Rotomaster distribution in Melbourne (http://www.rotomaster.com.au/) who went over the turbo for my peace of mind. They confirmed the above specs and it being in perfect, unused condition.

You will notice it is visually slightly different to a typical T51R (smooth compressor cover, silver nut) and I am advised this is due to it being an earlier version of the T51R, with no detriment to its performance. I actually prefer the smoother look but each to their own.

The compressor cover has recently been professionally mirror polished.

The wastegate is NOT brand new, however has had minimal use and is in great condition. It is a also a genuine HKS item, not a copy.

I have added as much info here as possible, but if you have any additional queries or comments please PM me.

HKS Japan sell these for 383,000Y, which at the current exchange rate is;

383,000.00 JPY = 4,877.50 AUD

Japan Yen Australia Dollars

1 JPY = 0.0127350 AUD 1 AUD = 78.5238 JPY

$2500. Please don't PM me offerring 1800-2000...I am not in need of the money that badly.

I think I've said enough...oh, I am in Melbourne, as is the turbo. Happy to post at buyers expense to anywhere in the world.

Cheers,

Chris

IMG_1487.jpg

IMG_1488.jpg

IMG_1492.jpg

IMG_1493.jpg

IMG_1494.jpg

IMG_1495.jpg

IMG_1499.jpg

Here's a snap from the HKS site;

HKS.jpg

Edited by YSR020

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...