Jump to content
SAU Community

Recommended Posts

Good day!

Does anyone know the exact location of the fuse box for the v35 model ? my skyline has got the air bag light on. I just want to try removing the fuse & clean it a little bit.

cheers

"Turn the key to the on position and watch the airbag light. It should stay solid for 5-7 secs, and then turn off, and then start to flash.

To reset the light, you must turn the key to on, watch the airbag light stay solid for 5-7 secs and as soon as the airbag light turns off, turn the key to the off position (you have to turn the key to off before the airbag light starts to flash, or you must start over). You need to repeat this 5 times. Try to start the car, and hopefully the light will be reset"

No more Air Bag flashing light or Nav screen warning!!

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4925485
Share on other sites

"Turn the key to the on position and watch the airbag light. It should stay solid for 5-7 secs, and then turn off, and then start to flash.

To reset the light, you must turn the key to on, watch the airbag light stay solid for 5-7 secs and as soon as the airbag light turns off, turn the key to the off position (you have to turn the key to off before the airbag light starts to flash, or you must start over). You need to repeat this 5 times. Try to start the car, and hopefully the light will be reset"

No more Air Bag flashing light or Nav screen warning!!

cheers, i will try this

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4925498
Share on other sites

I took it & they pluged it in to the computer the out up was " B1166 LH (Open)

Meaning, the fault is LH curtin air bags. & my car doesn't have side air bags.

& the light is back on.

Any interstate professinals have you had this experince before ?

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4938929
Share on other sites

I have the sedan.

I'll give you something else to check, cause I'm having the same issue as well. The scanner gave me some wierd message like yours too(can't remember if it was the same though as it was ages ago).

Under each of the front seatbelts there is a connector with a wiring harness. Is it loose? Check both front seatbelts. I snapped the connector one day while trying to adjust it(bloody things don't move). And since then the airbag light comes on. If I hook in the connector with a cable tie, it's good. If I play with it, airbag light comes back. Finally decided to order the part from Japan, will be here in a few weeks.

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4941063
Share on other sites

Thankx Skizo, that sounds more like it. did u have it coming each time you were driving ? what was ur error code? B1166 ?

Because the scanner said LH side I gave the LH seat & wiring a good shake & reset using the ON/OFF x 5times. & I have driven about 100k's all around & it still hasn't poped up. so hopefuly it's gone for good.

there is soo much wiring under that seat.

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4941547
Share on other sites

Can't remember the code, it's been so long since i hooked up a scanner to it.

Yes the airbag light would come on every time I drove the car. Even after a reset, it would be back the next time I drove the car, until I cable tied it. So in my case I believe that the broken seatbelt connector on the buckle was the issue.

If it comes back let me know as there are some more detailed things you can check as well.

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4942692
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...