Jump to content
SAU Community

Blitz Duel Sbc Help

steg

By steg,
in General Automotive Discussion

 Share

Recommended Posts

steg Newbie

steg

Posted
Posted

Hey guys, can anyone help me with my blitz duel sbc. Had my R34 GTT for about a year now and i just started playing with settings. while accelerating hard, at a certain point its like the engine cuts out. just woundering how to set the thing to stop it from cutting out

Link to comment
https://www.sau.com.au/forums/topic/295611-blitz-duel-sbc-help/
Share on other sites
FLN75S Mentor

FLN75S

Posted
Posted

Hey mate it wont be the boost controller thats causing the problem i run a Blitz boost controller as well and it works great its impossible to set it bad really as they are very easy to play with.

Your problem will be boost cut specially if your running a standard computer. you will prolly get a happy 10psi out of it before it starts to run bad.

Have a read in the forced induction and do a search on rich and retard or boost cut and it will make things clear for you.

I recomend you contact Toshi on these forums as he tunes the standard computers and that will allow you to run more boost plus with his tune the car will go 10 times better he has done mine and it was by far the best mod i have done for power and torque increase.

  • 3 weeks later...
realor Enthusiast

realor

Posted
Posted (edited)

I had a similar problem with my R34 GTT running F-con v-pro but the stock ecu was cutting out (violent power loss and jerk forward) at just under 1 bar. The boost controller shows around 90kPa peak pressure before it starts cutting out. What I ended up doing was setting it so it wouldn't go above 90kPa, seems good now that I think about it to avoid damaging the motor. This is with an HKS EBC though, not sure how SBC works.

If you wanna run pressure higher than this than a fuel cut defender would do the trick with stock ecu or upgrade to a aftermarker computer. I wouldn't recommend going much above 1 bar with stock turbo though.

PS why is this this in 'Other Nissan Imports' section?

Edited by realor
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...