Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Hey buddy, u still got the front seats?

If so how bad is the wear on the drivers side? ripped etc or just faded?

cheers ash

its got a wear mark on the drivers bolster, Welcome to come have a look and if you want them I can rip them out on the spot.

also do u have the stock bov mate? or did that go with engine?

cheers

With the engine

any chance u had a mongoose m80 alarm in there? pm me

Sorry mate no idea what alarm is in there.

Hey mate,

you selling them rims?

pm me cheers bud

oops just read the post again lol, umm do u still have the rims and tyres?

Yeh Check first post for prices, $200

hey mate im chasing 5 non stripped wheel studs and delivery to 4510, thanks

Really dont think I could be bothered but call it $50

have you got the front lower control arm (left hand side) and the front castor rods(for both sides)? if so please text the price including postage to Brisbane to 0422850370.

Hey mate,

Cant separate lower control arms, but all up both lower control arms and both Castor rods delivered for $350

Hey,

Do you still have the stock suspension? I'm interested and in Adelaide, need to get through regency v. soon.

You can call me on 0408 339 two one one or PM me.

Cheers

Hey mate,

Yeh I do, but its in the car. how soon you going to regency?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...