Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Hey buddy, u still got the front seats?

If so how bad is the wear on the drivers side? ripped etc or just faded?

cheers ash

its got a wear mark on the drivers bolster, Welcome to come have a look and if you want them I can rip them out on the spot.

also do u have the stock bov mate? or did that go with engine?

cheers

With the engine

any chance u had a mongoose m80 alarm in there? pm me

Sorry mate no idea what alarm is in there.

Hey mate,

you selling them rims?

pm me cheers bud

oops just read the post again lol, umm do u still have the rims and tyres?

Yeh Check first post for prices, $200

hey mate im chasing 5 non stripped wheel studs and delivery to 4510, thanks

Really dont think I could be bothered but call it $50

have you got the front lower control arm (left hand side) and the front castor rods(for both sides)? if so please text the price including postage to Brisbane to 0422850370.

Hey mate,

Cant separate lower control arms, but all up both lower control arms and both Castor rods delivered for $350

Hey,

Do you still have the stock suspension? I'm interested and in Adelaide, need to get through regency v. soon.

You can call me on 0408 339 two one one or PM me.

Cheers

Hey mate,

Yeh I do, but its in the car. how soon you going to regency?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...