Jump to content
SAU Community

Recommended Posts

Hi all,

Got to give away my standard Clarion headunit/CD stacker controller and the 6-CD stacker unit out of the boot. These came standard on S2 with Xanavi setup. If you want them for a spare or something, all I ask is that you help pay the postage (a donation to me of $5 should be fine :thumbsup:)

DaveB

Here's a pic' of it anyway Chris, just curious what it is/what you were looking for...

post-32445-1257930149_thumb.jpg

Just to let people know again... at this stage it's gone (sold?) given away, thanks.

Edited by DaveB
Dave

any tips for pulling out the stacker and wiring?

cheers

Sure; wiring first... the wiring colours for the headunit I found matched up with the text diagram at the top of this post:

http://www.skylinesaustralia.com/forums/To...l=stereo+wiring

I had a xanavi unit, and to adapt it to the standard stereo wiring harness there was a short adapter which went from the standard wiring scheme (as per the post above) to separate/different plugs for the xanavi unit.

If you are after wiring diagrams for the xanavi you can try this pic'... mostly Japanese sorry :) (also I think it's series 1, but seems to be 99% the same...)

post-32445-1257990662_thumb.jpg

When you remove the headunit you've pretty much got to remove everything as per the headunit install post above. ***ONE DIFFERENCE WITH XANAVI*** is that there are two screws which hold the stereo surround to the mounting bracket that the headunit/LCD etc. fits in. So, you can't just pry off the surround as suggested in pics 4 and 5 of post #2.

Apart from that it is a really good guide. You'll know if you have a xanavi setup, because you've got 2-DIN-unit LCD touchscreen for your climate control, with a (albeit NTSC) TV tuner :D

well my old standard unit blew a while back so ive just got a basic clarion unit that had

been doing the rounds of all my mates cars, but it just means ive got no stacker control.

so i just figured if someone was giving one away id grab it, dont mind who's it was lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...