Attessa Ecu Pinouts ?

[RSVFOURUK]

Anyone know or have a diagram of the Stagea ATTESSA pinouts .

I have done a search and could not find anything.

Edited November 13, 2009 by RSVFOURUK

[QLDR31]

Anyone know or have a diagram of the Stagea ATTESSA pinouts .

I have done a search and could not find anything.

Find any info on this ?

Do you now where the ATTESSA computer is located, i'm trying to wire up some GTR gauges.

[unique1]

the attessa ecu is behind the passenger side panel in the cargo area near the rear of the car, its a pain to get to the ecu as you have to remove a few trims.

[QLDR31]

Anyone know or have a diagram of the Stagea ATTESSA pinouts .

I have done a search and could not find anything.

Why do you need pinouts ? I need pinouts for the front torque gauge. I have the pinouts for I think the R32 GTR but could be different.

the attessa ecu is behind the passenger side panel in the cargo area near the rear of the car, its a pain to get to the ecu as you have to remove a few trims.

Thanks, I think I found it. Its a pretty decent size box about the same size as an ECU. Just forward of the storage hole.

Next step is working out the pinouts.

[QLDR31]

From searching around supposably the Stagea uses the same ATTESSA as the R33 and R34 Skylines. I found one usless diagram for R33 and R34 Skyline Attessa but it didn't have wiring colours or image of the connector with pin numbers.

Here is a pic I took of my Stagea S2 RS4 ATTESSA Controller:

Here is a diagram I found for wiring up a TS-Dancer DancerDash ATESA Control Unit (Unfortunately it doesn't appear to use the gauge outputs):

The R32 uses a different connectors for ATTESSA. Here is the R32 pinouts:

Edited January 4, 2010 by QLDR31