Jump to content
SAU Community

Recommended Posts

Hi fellas,

I am after some smoked R33 GTR side and front indicators.

I found some smoked side indicators on Ebay from JDM Concepts for $105 posted (which is bargain in my opinion) but cannot find any smoked round indicators for the R33 GTR/Nismo 400R front bar.

I think it would look wicked for all indicators are clear and smoked not the old orange ones.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...e=STRK:MEWAX:IT

nismoindicatorsmokeds15.jpg

AND, should I also go smoked lights all around INCLUDING the rear lights?

http://cgi.ebay.com.au/CRYSTAL-SMOKED-TAIL...=item335775c752

3799661810a9489329963o.jpg

PS: as a side question, is it hard to change R33 GTR side indicators? Do the guards need to be removed in order for this to happen?

SM

Cheaper, free post :D

http://cgi.ebay.com.au/Nismo-Indicator-Set...2#ht_1244wt_939

If they're changed the same way as the gtst then they can be changed with the fender on the car.

I wouldn't go for those rear lamps, I don't like them but I guess it's personal opinion

http://justjap.com/store/product.php?produ...=321&page=2

those of any interest to you?

Hope this helps,

Sean

thanks mate ... Got these already but am after front smoked indicators now.

no worries, only other thing i can think of is..(dont know if this is possible, jsut thinking outloud) buying a clear set, heating them partially the same way people do to take apart headlights for projector conversion, then spraying the inside of the lense with that DIY lens smoking stuff in spray cans they sell at autobarn etc...

thanks mate ... Got these already but am after front smoked indicators now.

Please dont get the smoked rear! My mate had them on his 34, and it looked like absolute shit. Got stickered within a week. The standard ones look much better anyway. Although standard coloured LED tail lights look the best imo.

Please dont get the smoked rear! My mate had them on his 34, and it looked like absolute shit. Got stickered within a week. The standard ones look much better anyway. Although standard coloured LED tail lights look the best imo.

Thanks mate...not going to get rears...looks like shit indeed! LOL

I think the stock rear lights look best...hate LED ones....

But yeah, now that I know where to get smoked side ones....in need of front ones now!

If nismo make them I can go order a set as Nismo shop is 5mins from my place here in jappa but they could be costly!!

photo.jpg

That's awesome...but they still don't look smoked...I'm after a unique look...have never seen smoked front indicators...these ones look more like clear ones.

no worries, only other thing i can think of is..(dont know if this is possible, jsut thinking outloud) buying a clear set, heating them partially the same way people do to take apart headlights for projector conversion, then spraying the inside of the lense with that DIY lens smoking stuff in spray cans they sell at autobarn etc...

Thanks champ...is this possible? So you think just get clear ones and then get a spray can and spray the lens? Never heard of a smoking-type spray can...do you have any more details?

Yeah mate they are clear ones, I just chucked the pic up so you knew it was genuine Nismo shop !!!

My mistake. But if its a genuine Nismo part, then ordering them is piece of p#ss !!

it would very much depend on how the body of the indicator is made. you know how headlights have the front flat bit and then the main body, and they are joined together with a kind of glue that can be heated and prised apart.. well if indicator body was one piece i tihnk youd be stuffed but if its two piece why wouldnt the same process ppl use on headlights work.. as for the spray stuff i remember it being for sale in autobarn or super cheap auto. described on the directions to apply more layers dependign on how dark you want the smoke effect

so i jsut googled. VHT nightshade is waht im talkign about. 13 bucks a can or so from autobarn.

can anyone shed any light (no pun intended) on the design of the body of the indicators spunky munky is lookign at?? one or two piece?

Thanks champ...is this possible? So you think just get clear ones and then get a spray can and spray the lens? Never heard of a smoking-type spray can...do you have any more details?

The same mate with the tinted tail lights also tinted his standard front lights. Looked really good considering he did it with them on the car, 3 days after it was painted, 2 hours before the Perth Auto Salon... Looked very smoked when off, and obviously orange when on. He also took the car over the pits 3 times like that, and passed everytime.

The same mate with the tinted tail lights also tinted his standard front lights. Looked really good considering he did it with them on the car, 3 days after it was painted, 2 hours before the Perth Auto Salon... Looked very smoked when off, and obviously orange when on. He also took the car over the pits 3 times like that, and passed everytime.

Would you have any pictures or anything of this? Sounds exactly like what I want to achieve.

Considering that genuine Nismo head lights/indicators cost over $300 combined - I'd be really careful when doing this.

Thanks all.

Hey mate, i know what you want to do..

There is a way in which I have done it and works fantastic..

Find a spray painter mate, and spray your lights in a light coat of HOK candy black. When its applied to clear items, ie tailights and headlights, it becomes transclucent and looks f**ken insane..

My mate did it to all his lights on his black VE-SS, and OMG looks fantastic, you;d just have to have clear indicators to start with or you will have silly looking orange smokes indicators!

Goodluck!

Hey mate, i know what you want to do..

There is a way in which I have done it and works fantastic..

Find a spray painter mate, and spray your lights in a light coat of HOK candy black. When its applied to clear items, ie tailights and headlights, it becomes transclucent and looks f**ken insane..

My mate did it to all his lights on his black VE-SS, and OMG looks fantastic, you;d just have to have clear indicators to start with or you will have silly looking orange smokes indicators!

Goodluck!

Wow, sounds easy...how many coats of this paint should I apply? I would have guess, about two coats as more it would be too dark?

Would you have any pictures?

Thanks.

SM

From afar:

295pi1j.jpg

Close up:

2ursg8m.jpg

And the tinted tail lights:

9kqdzp.jpg

Wow that's tough...this is exactly what I want...so you think just go to Autobarn and buy a spray can of smokey paint? I'm so bad with spray painting - does anyone (with a little experience) want to help me here? :P

Thanks all...but this is what I want...

Ok, so I've bought myself a set of Nismo side and front indicators...cost me over $240. The side ones are already smoked (so I will leave them) - the front ones are just clear...I've been to Autobarn and they actually sell "smoking spray paint."

They say if I spray like 5mm away and do it gently, 2 coats should do the trick they'll last like forever...however, I'm just a bit hesitant as I do not want to stuff up my front indicators that cost like $170 a set. So can anyone please give me some tips in regard to spraying?

Thanks.

SM

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...