Jump to content
SAU Community

Recommended Posts

i have for sale a series one r33 gtst boot lid and series 1 spoiler $150 will need a paint to suit the colour of your car currently is wine red and the clear is peeling of the boot lid but not the spoiler

stock side mount intercooler no pipes $30 each x2

stock r33 sway bars dont know what there worth make an offer

big oval muffler5 inch tip 3 inch inlet $90

2 stock cat one with the centre bash out make an offer

r33 stock wastegate $50

or swap for a stock turbo plz i need one

PLUS is anyone interested in swap a ducktail/stealth spoiler for a series 2 and series 1 wing let me know cause i really want a stealth spoiler

parts are on brisbane southside

Edited by Turbo 33
Link to comment
https://www.sau.com.au/forums/topic/297502-r33-parts/
Share on other sites

UPDATE I NEED THIS STUFF GONE MAKE AN OFFER I NEED THE SPACE WANT IT GONE SOON OR IT CAN ALL GO TO THE DUMP

series one r33 gtst boot lid and series 1 spoiler $150 will need a paint to suit the colour of your car currently is wine red and the clear is peeling of the boot lid but not the spoiler

underside of the bootlid plastic $30

stock side mount intercooler no pipes $30 each x2

stock r33 sway bars dont know what there worth make an offer

big oval muffler5 inch tip 3 inch inlet $90

2 stock cats one with the centre bashed out $15 each

r33 stock wastegate $50

aac valve $30

stock top part of the rb25det plenum $50

stock boost soleniod $30

stock rear bar damaged just needs a plastic weld my exhaust burnt it :nyaanyaa: $40

stock front pipe heat shield $10

stock dump pipe heat shield $5

perfer pick up but will post at buyers expense

post-41282-1259549529_thumb.jpg

post-41282-1259549695_thumb.jpg

post-41282-1259549827_thumb.jpg

post-41282-1259549971_thumb.jpg

post-41282-1259550072_thumb.jpg

post-41282-1259550170_thumb.jpg

post-41282-1259550288_thumb.jpg

post-41282-1259550401_thumb.jpg

post-41282-1259550490_thumb.jpg

post-41282-1259550624_thumb.jpg

post-41282-1259550778_thumb.jpg

post-41282-1259550891_thumb.jpg

Edited by Turbo 33
Link to comment
https://www.sau.com.au/forums/topic/297502-r33-parts/#findComment-4962835
Share on other sites

  • 3 weeks later...

i also have 4 rims no tyres 3 rims are good 1 has a buckle not sure on model or offset but i can find out the offset tomorrow there 18 by 8 they have abit of gutter rash will also get some more pics tomorrow looking for around $350 for the 4 of them or swap for items of interest eg. trust front bar, stock 33 turbo, etc let me know what you have

r33 stock wastegate $50

aac valve $30

stock top part of the rb25det plenum $50

stock boost soleniod $30

stock rear bar damaged just needs a plastic weld my exhaust burnt it $40

stock front pipe heat shield $10

stock dump pipe heat shield $5

stock cat with centre bashed out $20

series one r33 gtst boot lid and series 1 spoiler $150 will need a paint to suit the colour of your car currently is wine red and the clear is peeling of the boot lid but not the spoiler

underside of the bootlid plastic $30

stock side mount intercooler no pipes $30 each x2

stock r33 sway bars dont know what there worth make an offer

post-41282-1262776984_thumb.jpg

Edited by Turbo 33
Link to comment
https://www.sau.com.au/forums/topic/297502-r33-parts/#findComment-5019685
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...