Jump to content
SAU Community

Stack St8130 Street-race Dash Display

reaper
 Share

Recommended Posts

reaper Experienced

reaper

Posted
Posted

Hi Guys,

Im stripping my car so up for sale is my Stack ST8130 Street-Race Dash Display. I optioned it in with a white 0-3-10500 rpm dash face and the gearbox speedo sensor aswell. All up it cost me over 3k delivered and took a long time to get here. Has been used in the car for less than 5000kms and all is in perfect condition. Comes with the loom and sensors for oil temp, water temp, oil pressure, fuel level, tacho, speedo.

It looks like this apart from the tacho going higher and the fact it reads in kmh not mph.

8130-WHITE-light.gif

You can read all about it here. Basically it has warnings for everything and is generally awesome so it really pains me to sell it but it needs to go.

Price is 2000 ONO which is alot cheaper than retail.

Any questions ask here/pm or on 0403858714.

Thanks,

Brett

benzau Enthusiast

benzau

Posted
Posted

Hope Brett doesn't mind me throwing these up.

Pickup available from Ryde area, or can organise delivery to Sydney metro.

Sorry about pics, couldn't be bothered with the DSLR.

web.jpg

web.jpg

web.jpg

reaper Experienced

reaper

Posted
  • Author
Posted

bump, need this gone guys its practically brand new with 0km's on it and comes with all the sensors and wiring plus optional sensors

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...