Jump to content
SAU Community

Noise Coming From Gearbox Sometimes


sturb25
 Share

Recommended Posts

Ive got this noise coming from my gearbox and it only happens some of the time. probably once a week and i drive my car everyday. Its like a high pitched deep growl and it goes away instantly when i put my foot on the clutch, sometimes it returns but most of the time it just disapears as soon as i put my foot on the clutch. Any suggestions on what it could be?

Link to comment
Share on other sites

Hey mate, your throwout bearing has become dry, or seized all together, this results in a high pitched squeal when releasing the clutch pedal out. Most commonly on early starts but can occur at any time.

Unfortunately there is no easy fix, its a box out job, and you mosewell replace your clutch while your at it (kinda pointless spending $400 in labour to replace a $25 part)

I have driven a car like that for a few months with intermittent throwout noise, although I don't recommend it, you can keep driving the car if funds are tight!

And when the time comes, shoot me a PM, I can hook you up with a Exedy clutch kit cheaper than any sponsor here on SAU!

:rofl:

Link to comment
Share on other sites

  • 3 weeks later...

i've got something similar i think.. its a slight whine when i have the clutch in on cold starts! dissapears when i put it into neutral and release the clutch :)

it doesnt really annoy me too much tho!

Link to comment
Share on other sites

  • 4 months later...
Whoops quoted post ended up here?

Hey mate,

Hope you read this, i'm in need of a clutch kit for a 2001 c34 stagea.. except my post count isn't high enough to pm you, can you contact me with contact details?

Thanks

Edited by Blackinc
Link to comment
Share on other sites

If the noise disappears when you depress the clutch it means that the problem is in the box.

When it is neutral the input shaft is turning that is why the noise is from the box. Depress the clutch, no noise.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • A million years later, searching for something else I posted, I was reminded of this thread. I eventually bought a new gauge. Put it in using the same probe (which has been installed the whole time stopping the exhaust gas from coming out the hole) and.... normal service has been resumed. The old gauge was definitely broken. /semi-pointless closure.
    • They're available from Nissan! I was able to buy a GTR (R33) one.. relatively* recently. Perhaps this stopped now but I bought mine ... relatively recently. I believe the 300ZX one has a different knee-point which is more rear biased, which I think the HFM one echos.
    • Hey Team, A bit to unload here. Hello from New Zealand I have a 2009 Nissan Skyline 370GT ( Type SP ) Auto 7 Speed, that I've had since 2022 and have loved the car since. Its painted in its factory QAB ( White Pearl ) with the Impul front lip and rare boot lid/spoiler with woodgrain interior. Mods since I've bought it and installed: Stillen Gen 3 Long Tube Intakes Motordyne Shockwave Catback Exhaust JDM Skyline Taillights Fake carbon spoiler and front grill ( Will be taking off.... its cringe ) VR30DETT Transmission from the Q50/Q60 to hold up to 550 Foot pounds of Torque ( 753 nm ) reliable  Currently I plan to turbo the car and have all the parts needed ( Photo Included ), I have my tuning day set on August 8th and choosing EcuTek as my tuning platform. Two of my work colleagues has their 370Z ( Manuel ) and 370GT coupe ( Type SP - Manuel ) also turbo'd and they have inspired me to get it done I have prepped quite a wee bit for this, as I had done the VR30 transmission swap over to this car so that I can achieve my HP goals without torque being an issue. I've taken quite a cautions route, as im always thinking about the safety as well as performance with my build, I'd rather do it properly and not cut corners etc etc. Any who, I've recently picked up the AutoStrada cruise control kit with all the included cables/wires/instructions. I've been hella researching around and can't find much on the integration that it has with the ECU and/or system. the only reason why im asking is, because I'm getting EcuTek and one of them RaceRom features allows the ability to switch maps via the cruise control function, which I am currently in the grey area if this would add-on via the Canbus will allow me to switch maps or have the option to use Cruise Control to begin with ( showing up on the instrument cluster to advise Cruise Control being set etc etc )  Because of my model being Type SP, Cruise Control on these models was never an option from factory unfortunately.  Anyone here that is able to shed some light on if the Cruise Control via AutoStrada gives OEM ability over the cruise control. Would love and appreciate any response and/or assistance with this, also happy to answer any question about my build and ill try pitch in where I can. Warm Regards,  
    • I thought the only (new) BM57 that was readily available was the one that was a BM57 but with the wrong bias. HFM or someone's?
×
×
  • Create New...