Jump to content
SAU Community

Recommended Posts

Hi all

i have recently decided to go back to a stock front bar - the aftermarket front bar on my car is rooted

i want to get a stock S2 r33 front bar - i was just about to buy one and the question popped up in my mind of , will my FMIC fit

i have a Apexi GT spec FMIC - My current front bar front area dimensions are 792mm wide and 274mm high . Did some goggling and only found one spec for the FMIC - 610 X 237 X 136 MM not sure how correct that is and only think thats the core measurements.

would my FMIC fit with a S2 bar? or could someone measure the front area for me ?

Link to comment
https://www.sau.com.au/forums/topic/298917-s2-front-bar-and-fmic/
Share on other sites

No it won't fit mate...however, if you modify (cut the front area next to the fog lights) it should fit...it would be much easier if you just go and get another FG front bar, e.g. a GTR one or something and paint that...would look better too in my opinion.

Good luck,

yep what monkey magic said,

you'll need to chop abit off the bar to make it fit

just make your measurements and double check b4 you do

on a side note, this is the monkey magic I grew up knowing

I reckon he looks much closer to a monkey than the jap version

post-36123-1259982570_thumb.jpg

yep what monkey magic said,

you'll need to chop abit off the bar to make it fit

just make your measurements and double check b4 you do

on a side note, this is the monkey magic I grew up knowing

I reckon he looks much closer to a monkey than the jap version

Hi hi hi hi....thanks for noticing mate!

Well, I have to agree with you - the Chinese version of Monkey Magic is actually more closely related to the original script...after all, Monkey Magic is a Chinese folk tale. However, I think the Japanese version is much better and the actors do a better job. :)

yeah it's good, still some bits of the japanese version is a bit weird to me,

like how he summons the cloud by waving his fingers about his mouth as he blows just seems kind of retarded to me hehe

yeah it's good, still some bits of the japanese version is a bit weird to me,

like how he summons the cloud by waving his fingers about his mouth as he blows just seems kind of retarded to me hehe

yeah agreed! Hi hi hi.....

So you're a MJ fan too ah?

yep 1st music video that really made an impact was Black or White

I was thinking "nice moves, but wtf was with all the background scene changes?"

As a black man would say: he dead. :-$

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2 spots that my exhaust guy joined the 2 pipes together  Made a big difference. I'm now able to live with it. I can make it louder if I want by removing the HKS caps.
    • Hi all, considering clutch upgrade to support 1130 engine hp from 1650cc injectors on e50 at 85% duty cycle (1650 x (11.85/14.7) x 85%). Narrows down to these three as they can be converted to use gm 26 spline input shaft if I ever want to use transmission with that input shaft (orc1000f and r3c easy/cheap just change center hub; tr2cd pricier must change clutch discs). Pricing orc1000f similar to tr2cd, r3c about usd 200 pricier. Orc1000f triple plate 200mm. Tr2cd twin plate 215mm. R3c triple plate 215mm. Claimed max torque : orc 1000f 723 lbs ft; tr2cd 800 lbs ft; r3c 1100 lbs ft. Why orc1000f triple plate but claims lower max torque vs tr2cd twins? Is orc1000f underrated? Any info maxing out these clutches? Info on street/traffic driveability/pedal feel? Thank you for any info on them.
    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
×
×
  • Create New...