Jump to content
SAU Community

Recommended Posts

I have a near stock 32 GTR (only performance mods are cat back exhaust, pods and boost restriction valve removed) and was wondering what gearbox oil people would recommend?

I have heard Redline Lightweight Shockproof is one of the best. Has anyone had any experience with this oil? I believe it will be about $250 just to purchase enough oil for the gearbox, but if its as good as I have heard then I don't care.

The second review on this website is from the owner of a 32 GTR:

http://www.redlineoil.com.au/testimonials.asp?CategoryID=3

Any advice greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/299697-r32-gtr-gearbox-oil/
Share on other sites

i have used redline in my gtr for 2.5 years and cant fault it. I had a crunchy 3rd gear with motul, but now its smooth as with the redline.

some people say redline should be used in a synchro box, but until someone can give me a good reason why not, i'll keep using it, as it has transformed my gearbox.

i have used redline in my gtr for 2.5 years and cant fault it. I had a crunchy 3rd gear with motul, but now its smooth as with the redline.

some people say redline should be used in a synchro box, but until someone can give me a good reason why not, i'll keep using it, as it has transformed my gearbox.

Cheers. I assume when you refer to redline you are talking about the "shockproof" oil the sell?

I've used Redline lightweight shockproof in my gearbox and transfer case in 2 cars for 2 years.

I also use the heavyweight stuff in the diffs.

never had an issue, makes shifts feel a bit more firm and responsive.

worth the money in my opinion.

Mr Niggles

  • 2 weeks later...

A couple of Canadian owners are using GM Syncromesh tranny fluid, same results as Redline. However, IMO Royal Purple is best and I will be putting some Royal Purple Syncromax to use.

Edited by Beacher1B0

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...